Wiring diagrams Volks WagenPower assisted steering (Polo Limousine)

Wiring diagrams Volks WagenPower assisted steering (Polo Limousine) from july 2003
Polo Current Flow Diagram No.  519 / 1
Edition 07.2003
For alternatives to relay and fuse positions as well as multi-pin connector wiring - see "Fitting locations" section.
Fuse colours
30 A -  green
25 A -  white
20 A -  yellow
15 A -  blue
10 A -  red
7,5 A -  brown
5 A -  beige
3 A -  purple

Polo Current Flow Diagram No.  519 / 2
ws = white
sw = black
ro = red
rt = red
br = brown
gn = green
bl = blue
gr = grey
li = purple
vi = purple
ge = yellow
or = orange
rs = pink
 
 
 
 
 
Power steering control unit, power steering sensor, servotronic warning lamp
G250 -   Power steering sensor
J285 -   Control unit with display in dash panel insert
J500 -   Power steering control unit
J519 -   Onboard supply control unit
K92 -   Servotronic warning lamp
S164 -   Fuse 3 (30), in fuse holder on battery
S177 -   Fuse 5 (30), in fuse holder on battery
SB7 -   Fuse 7 on fuse holder
T2a -   2-pin connector
T3s -   3-pin connector
T4r -   4-pin connector
T4s -   4-pin connector
T11a -   11-pin connector, white, on left of bulkhead
T11b -   11-pin connector, red, on left of bulkhead
T16a -   16-pin connector, black
T32a -   32-pin connector
V119 -   Steering hydraulics pump
  12 -   Earth point, on left in engine compartment
  A121 -   Connection (high bus), in dash panel wiring harness
  A122 -   Connection (low bus), in dash panel wiring harness
  A139 -   Connection 3 (15), in dash panel wiring harness
  D159 -   Connection (high bus), in engine compartment wiring harness
  D160 -   Connection (low bus), in engine compartment wiring harness
* -   optional installation
** -   ⇒ see fitting locations