VW VENTO 1996 – Seat belt warning system . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW VENTO 1996 - Relay for belt warning system - belt switch driver's side

D	Ignition/starter switch
E24	Belt switch - driver's side
F2	Door contact switch, driver side
F5	Luggage compartment light switch
J34	Seat belt warning system relay, above the relay plate
R	Radio
T1a	Single connector, behind the relay plate
T1b	Single connector, behind the relay plate
T1c	Single connector, behind the relay plate
T1g	Single connector, left lower A-pillar
T2g	2-pin connector, left in luggage compartment
T5e	5-pin connector, left in luggage compartment
T5f	5-pin connector, above the relay plate
T5g	5-pin connector, in tailgate/boot lid
T8	8-pin connector, on radio
TV5	Terminal 15a junction box, above therelay plate
TV7	Terminal 31 junction box, above the relay plate
TV17	Door contact switch junction box, above the relay plate
W3	Luggage compartment light
W13	Front passenger reading lamp
W15	Interior light with switch-off delay
30	Earth point -1-, next to relay plate
98	Earth connection, in tailgate/boot lid wiring harness
196	Earth connection -3-, in rear wiring harness
R9	Connection (door contact switch), in rear door wiring harness
W9	Positive connection (30), in rear wiring harness

F4	Reversing light switch
F9	Handbrake warning switch
F34	Brake fluid level warning contact
J104	ABS with EDL control unit
J234	Airbag control unit
K	Dash panel insert
K19	Seat belt warning system warning lamp
K47	ABS warning lamp
K75	Airbag warning lamp
T1	Single connector, behind the relay plate
T2f	2-pin connector, behind dash panel
T7d	7-pin connector
T25	25-pin connector
T28	28-pin connector, on dash panel insert
T30	30-pin connector
W6	Glove box light
A40	Positive connection -1- (30), in dash panel wiring harness