Wiring Diagram VW SHARAN 1998 - Heater control unit - glow plug - ambient temperature switch - combustion blower - fuel pump
| F4 | Reversing light switch |
| F38 | Ambient temperature switch |
| G23 | Fuel pump |
| J162 | Heater control unit |
| Q6 | Glow plugs, in heater unit |
| S23 | Heating fuse, above relay plate |
| T2f | 2-pin connector |
| T8 | 8-pin connector, on heating control unit |
| T10 | 10-pin connector |
| TV5 | Terminal 15a junction box, left behind dash panel |
| V6 | Combustion air blower |
| C27 | Positive connection -2- (30), in headlight wiring harness |
| L62 | Positive connection (30a), in additional heater wiring harness |
Wiring Diagram VW SHARAN 1998 - Heater control unit - temperature sensor - flame monitor - overheating sensor
| C | Alternator |
| G18 | Temperature sensor |
| G64 | Flame monitor |
| G189 | Overheating sensor |
| J47 | Heated windscreen relay |
| J162 | Heater control unit |
| J285 | Control unit with display in dash panel insert |
| T1s | Single connector, diagnosis connection |
| T8 | 8-pin connector, on heating control unit |
| T10 | 10-pin connector |
| T28 | 28-pin connector, on dash panel insert |
| 57 | Earth point, left rear pillar |
| 196 | Earth connection -3-, in rear wiring harness |
Can't find your car? Check -> DiagnostData.com!
