Wiring Diagram VW KOMBI 2008 - Battery - starter - alternator - voltage regulator - ignition/starter switch
| A | Battery |
| B | Starter |
| C | Alternator |
| C1 | Voltage regulator |
| D | Ignition/starter switch |
| J623 | Engine control unit |
| K | Dash panel insert |
| T1b | Single connector, on alternator |
| T4d | 4-pin connector, behind the right trim in front dash panel |
| T7c | 7-pin connector, on ignition/starter switch |
| T14a | 14-pin connector, in right engine compartment |
| T32a | 32-pin connector, on dash panel insert |
| 1 | Earth strap, battery - body |
| A32 | Positive connection (30), in dash panel wiring harness |
| B273 | Positive connection (15), in main wiring harness |
| B298 | Positive connection 2 (30), in main wiring harness |
Wiring Diagram VW KOMBI 2008 - Heated rear window button - heated rear window control relay - heated rear window
| E15 | Heated rear window switch |
| E22 | Intermittent wiper switch |
| J48 | Heated rear window control relay |
| T1ah | Single connector, behind the left trim in front dash panel |
| T1ao | Single connector, on heated rear window switch |
| T1ap | Single connector, on heated rear window switch |
| T1aq | Single connector, on heated rear window switch |
| T1ar | Single connector, on heated rear window switch |
| T1as | Single connector, on heated rear window |
| T1at | Single connector, on heated rear window |
| T7a | 7-pin connector, on intermittent wiper switch |
| T9j | 9-pin connector, on heated rear window control relay |
| Z1 | Heated rear window |
| 45 | Earth point, centre behind dash panel |
| 74 | Earth point under roof trim |
| 135 | Earth connection 2, in dash panel wiring harness |
Wiring Diagram VW KOMBI 2008 - X-contact relief relay
| J59 | X-contact relief relay |
| SA4 | Fuse 4 on fuse holder A |
| T6c | 6-pin connector (grey), behind the right trim in front dash panel |
| T9c | 9-pin connector, on X-contact relief relay |
| T12a | 12-pin connector (black), on fuse holder |
| A40 | Positive connection 1 (30), in dash panel wiring harness |
| A61 | Positive connection (X), in dash panel wiring harness |
| A99 | Connection 1 (87), in dash panel wiring harness |
VW KOMBI 2008 Immobilizer control unit J362
| Immobilizer control unit -J362 - |
|
| Connector description: |
| A - | Double fitting connector in the immobilizer reading coil -T2k - |
| B - | Octuple fitting connector, in the immobilizer control unit -T8b - |
|
|
| Connector description: |
| A - | Instrument cluster indicator control unit -J285 - |
| B - | 32-pin fitting connector, in the control unit with instrument cluster indicator -T32a - |
| 1 - | Empty |
| 2 - | OBD |
| 3 - | Terminal 15 - Ignition |
| 4 - | Turn signal - right |
| 5 - | Fuel gauge sensor |
| 6 - | Fuel gauge sensor for additional reservoir |
| 7 - | Terminal 31 - For Sensors |
| 8 - | Coolant temperature sensor |
| 9 - | Terminal 31 - General Earth Point |
| 10 - | Oil pressure switch |
| 11 - | Engine rotations input |
| 12 - | Terminal 61 - Alternator |
| 13 - | Sudden fuel variation sensor |
| 14 - | Coolant reservoir level |
| 15 - | Terminal 58 |
| 16 - | Empty |
| 17 - | Empty |
| 18 - | Empty |
| 19 - | Empty |
| 20 - | Immobilizer control unit |
| 21 - | Empty |
| 22 - | Turn signals - left |
| 23 - | Terminal 30 |
| 24 - | Terminal 31 |
| 25 - | Terminal K - Diagnosis |
| 26 - | Empty |
| 27 - | EPC |
| 28 - | Speed sensor |
| 29 - | Handbrake control switch |
| 30 - | Terminal 56a - Headlights |
| 31 - | Empty |
| 32 - | Empty |
|
|
| Connector description: |
| A - | Engine control unit -J623 - |
| B/C - | 80-pin fitting connector, in the engine control unit -T80a - |
