Wiring Diagram VW POLO 2004 - Onboard supply control unit - ABS control unit with EDL - brake light switch - ABS return flow pump relay - ABS inlet valve - ABS outlet valve - ABS return flow pump
| A | Battery |
| D | Ignition/starter switch |
| F | Brake light switch |
| F47 | Cruise control system brake pedal switch/diesel direct injection system |
| J... | Engine control units |
| J104 | ABS control unit with EDL |
| J105 | ABS return flow pump relay |
| J519 | Onboard supply control unit |
| N99 | Front right ABS inlet valve |
| N100 | Front right ABS outlet valve |
| N101 | Front left ABS inlet valve |
| N102 | Front left ABS outlet valve |
| S178 | Fuse 6 (30), in fuse holder on battery |
| S179 | Fuse 7 (30), in fuse holder on battery |
| SB23 | Fuse 23 on fuse holder |
| T9a | 9-pin connector, yellow, on bulkhead |
| T11c | 11-pin connector, blue |
| T42 | 42-pin connector |
| V39 | ABS return flow pump |
| 614 | Earth point 2, on right in engine compartment |
| A2 | Positive connection (15), in dash panel wiring harness |
| A89 | Connection 2 (54), in dash panel wiring harness |
| A140 | Connection (TCS), in dash panel wiring harness |
| D73 | Positive connection (54), in engine compartment wiring harness |
| D101 | Connection 1, in engine compartment wiring harness |
Wiring Diagram VW POLO 2004 - Onboard supply control unit - ABS control unit - ABS hydraulic pump - inlet valves - outlet valves - ABS solenoid valve relay - speed sensor
| G44 | Rear right speed sensor |
| G45 | Front right speed sensor |
| G46 | Rear left speed sensor |
| G47 | Front left speed sensor |
| J104 | ABS control unit, in left engine compartment |
| J106 | ABS solenoid valve relay |
| J519 | Onboard supply control unit |
| N133 | Rear right ABS inlet valve |
| N134 | Rear left ABS inlet valve |
| N135 | Rear right ABS outlet valve |
| N136 | Rear left ABS outlet valve |
| T2k | 2-pin connector |
| T2l | 2-pin connector |
| T2m | 2-pin connector |
| T2n | 2-pin connector |
| T8x | 8-pin connector |
| T9a | 9-pin connector, yellow, on left of bulkhead |
| T42 | 42-pin connector |
| V64 | ABS hydraulic pump |
| J3 | Connection 1, in ABS wiring harness |
| J5 | Connection 2, in ABS wiring harness |
| J7 | Connection 3, in ABS wiring harness |
| J8 | Connection 4, in ABS wiring harness |
Wiring Diagram VW POLO 2004 - Onboard supply control unit - ABS control unit with EDL - TCS and ESP button - vehicle stabilization program valve - lateral acceleration sender - yaw rate sender - brake pressure sender 1
Wiring Diagram VW POLO 2004 - Onboard supply control unit - ABS control unit with EDL - steering angle sender - handbrake warning switch
Wiring Diagram VW POLO 2004 - ABS control unit with EDL - control unit with display in dash panel insert - warning lamps - brake pad wear sender
| G34 | Front left brake pad wear sender |
| G37 | Rear right brake pad wear sender |
| J285 | Display control unit in dash panel insert |
| J519 | Onboard supply control unit |
| K32 | Brake pad warning lamp |
| K47 | ABS warning lamp |
| K155 | Electronic stability program warning lamp, TCS/ESP |
| SB27 | Fuse 27 on fuse holder |
| T6q | 6-pin connector, brown, on left of bulkhead |
| T6r | 6-pin connector, brown, on left of bulkhead |
| T8c | 8-pin connector |
| T16a | 16-pin connector |
| T32a | 32-pin connector |
| 269 | Earth connection (sender earth) 1, in dash panel wiring harness |
| 327 | Earth connection (sender earth), in engine compartment wiring harness |
| A121 | Connection (high bus), in dash panel wiring harness |
| A122 | Connection (low bus), in dash panel wiring harness |
| A132 | Connection (TCS/ESP), in dash panel wiring harness |
| W31 | Connection 1 (brake pad wear indicator), in rear wiring harness |
| W32 | Connection 2 (brake pad wear indicator), in rear wiring harness |
| * | only models with rear drum brakes |
VW POLO 2004 Overview of all control units
Overview of all control units | | | | 1 - | ABS control unit with EDL -J104- |
| 2 - | Automatic gearbox control unit -J217- |
| 3 - | Glow plug activation control unit -J370- |
| 3 - | Automatic glow period control unit -J179- |
| 4 - | Power steering control unit -J500- |
| 5 - | Radiator fan control unit -J293- |
| 6 - | Engine control units -J248- , -J623- , -J361- , -J220- , -J687- , -J537- |
| 7 - | NOx sensor control unit -J583- |
| Polo | Fitting Locations | No. 805 / 2 |
|
| On right of bulkhead in engine compartment ⇒ -1- | | | |
| Polo | Fitting Locations | No. 805 / 3 |
|
| Connectors for ABS control unit -J104- |
| Polo | Fitting Locations | No. 805 / 4 |
|
| Connectors for ABS control unit -J104- |
| Polo | Fitting Locations | No. 805 / 5 |
|
VW POLO 2004 Glow plug activation control unit -J370- / automatic glow period control unit -J179- | | front left in engine compartment | | | |
| Polo | Fitting Locations | No. 805 / 6 |
|
VW POLO 2004 Automatic gearbox control unit -J217-Automatic gearbox control unit -J217- | | in engine compartment before battery | | | |
| Polo | Fitting Locations | No. 805 / 7 |
|
| Connectors for automatic gearbox control unit -J217- |
| A - | Automatic gearbox control unit -J217- |
| Polo | Fitting Locations | No. 805 / 8 |
|
VW POLO 2004 Power steering control unit -J500-Power steering control unit -J500- | | In engine compartment, on front of left longitudinal member | | 3 - | Connector, depends on equipment -T3s- or -T4s- | | | |
| Polo | Fitting Locations | No. 805 / 9 |
|
VW POLO 2004 Radiator fan control unit -J293-Radiator fan control unit -J293- | | Front left in engine compartment ⇒ -arrow A- | | | |
| Polo | Fitting Locations | No. 805 / 10 |
|
VW POLO 2004 NOx sensor control unit -J583-NOx sensor control unit -J583- | | Under vehicle, near catalytic converter ⇒ -arrow- | | A - | 10-pin connector, black (T10) | | B - | 14-pin connector, black (T14x) | | | |
| Polo | Fitting Locations | No. 805 / 11 |
|
VW POLO 2004 Engine control unit - J...Engine control unit - J... | | On left of bulkhead ⇒ -arrow- | | | |
| Polo | Fitting Locations | No. 805 / 12 |
|
| Engine control unit - J... | Note: | Note: see respective current flow diagram for engine control unit. | | | |
Note:
| t | Note Connector T80 comprises a 52-pin and a 28-pin connector. |
| t | * Depending on equipment |
| t | Connector 121, see 207/12 |
| t | Connector T94 and T60, see 207/13 |
| Polo | Fitting Locations | No. 805 / 13 |
|
| Engine control unit - J... | Note: | Note: see respective current flow diagram for engine control unit. | | | |
| A - | Engine control unit, 121-pin |
Note:
| Note Connector T121 comprises an 81-pin connector and a 40-pin connector. |
| Polo | Fitting Locations | No. 805 / 14 |
|
| Engine control unit - J... | Note: | Note: see respective current flow diagram for engine control unit. | | | |
| A - | Engine control unit, 154-pin |
Note:
| Note Connector T154 comprises a 94-pin and a 60-pin connector. |