VW CADDY 2002 – Anti–lock brake system (ABS) and anti–lock brake system (ABS) with electronic differential lock (EDL) . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW CADDY 2002 - ABS control unit - brake light switch

F	Brake light switch
J104	ABS/ABS with EDL control unit, in engine compartment, left
K47	ABS warning lamp
M21	Brake and tail light bulb, left
T25	25-pin connector, on ABS control unit
T2	2-pin connector, terminal for self-diagnosis, behind the relay plate
T28	28-pin connector, on dash panel insert
TV14	Terminal for self-diagnosis
18	Earth point, in engine compartment, left
100	Earth connection -1-, in ABS wiring harness

J104	ABS/ABS with EDL control unit, in engine compartment, left
N125	Differential lock valve 1 only models with EDS
N126	Differential lock valve 2 only models with EDS
N133	ABS inlet valve, rear right
N134	ABS inlet valve, rear left
N135	ABS outlet valve, rear right
N136	ABS outlet valve, rear left
T2a	2-pin connector, on control unit
V64	ABS hydraulic pump

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS/ABS with EDL control unit, in engine compartment, left
N99	ABS inlet valve, front right
N100	ABS outlet valve, front right
N101	ABS inlet valve, front left
N102	ABS outlet valve, front left
S123	Fuse 1 for ABS control unit, above the relay plate
S124	Fuse 2 for ABS control unit, above the relay plate
T2b	2-pin connector, under rear seat bench
T2c	2-pin connector, under rear seat bench
T25	25-pin connector, on ABS control unit
J1	Positive (+) connection (30), in ABS wiring harness