Wiring Diagram VW CADDY 2017 - Rear parking aid warning buzzer - Parking aid control unit - Data bus diagnostic interface
| H15 | Rear parking aid warning buzzer, on left under dash panel |
| J446 | Parking aid control unit |
| J533 | Data bus diagnostic interface |
| SC11 | Fuse 11 on fuse holder C |
| T20 | 20-pin connector, red |
| T26d | 26-pin connector, black |
| 374 | Earth connection 9, in main wiring harness |
| 375 | Earth connection 10, in main wiring harness |
| 377 | Earth connection 12, in main wiring harness |
| B383 | Connection 1 (powertrain CAN bus, high), in main wiring harness |
| B390 | Connection 1 (powertrain CAN bus, low), in main wiring harness |
| * | Only left-hand drive models |
| *2 | Only right-hand drive models |
Wiring Diagram VW CADDY 2017 - Rear left parking aid sender - Rear centre left parking aid sender - Rear centre right parking aid sender - Rear right parking aid sender - Parking aid control unit
| G203 | Rear left parking aid sender |
| G204 | Rear centre left parking aid sender |
| G205 | Rear centre right parking aid sender |
| G206 | Rear right parking aid sender |
| J446 | Parking aid control unit |
| T3ba | 3-pin connector, black |
| T3bb | 3-pin connector, black |
| T3bc | 3-pin connector, black |
| T3bd | 3-pin connector, black |
| T8x | 8-pin connector, behind rear bumper on right, black |
| T26d | 26-pin connector, black |
| 352 | Earth connection (parking aid), in rear bumper wiring harness |
| X68 | Positive connection (parking aid), in rear bumper wiring harness |
VW CADDY 2017 Overview of fuses
| Overview of fuses |
| 1 - | Fuses (SA) on fuse holder A |
| q | Fuse assignment, from June 2015 |
| 2 - | Fuses (SB) on fuse holder B |
| q | Fuse assignment, from June 2015 |
| 3 - | Fuses (SC) on fuse holder C |
| q | Fitting location right-hand drive |
| q | Fuse assignment, from June 2015 |
|
| 1 - | Fuse holder A -SA- |
| Fuse colours for MIDI strip fuse: |
| t | 200 A - purple |
| t | 150 A - grey |
| t | 125 A - pink |
| t | 100 A - blue |
| t | 80 A - white / transparent |
| t | 70 A - brown |
| t | 60 A - yellow |
| t | 50 A - red |
| t | 40 A - green |
| t | 30 A - orange |
Note:
|
| Fuses (SB) on fuse holder B |
| Fitting location of fuse holder B -SB- |
| On left in engine compartment, on E-box. |
| 1 - | Fuse holder B -SB- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
| Fuse colours for Maxi ATO flat fuse: |
| t | 60 A - blue |
| t | 50 A - red |
| t | 40 A - orange |
| t | 30 A - light green |
| t | 20 A - yellow |
|
| Fuses (SC) on fuse holder C |
| Fitting location, fuse holder C -SC- , left-hand drive |
| under dash panel on left. |
| 1 - | Fuse holder C -SC- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
|
