Wiring Diagram VW CADDY 2017 - Glove compartment light switch - Interior monitoring deactivation switch - Onboard supply control unit - Glove compartment light
| E26 | Glove compartment light switch |
| E267 | Interior monitoring deactivation switch |
| J519 | Onboard supply control unit |
| K162 | Interior monitoring off warning lamp |
| L76 | Button illumination bulb |
| T3e | 3-pin connector, black |
| T3h | 3-pin connector, black |
| T6aa | 6-pin connector, black |
| T52a | 52-pin connector, black |
| T52b | 52-pin connector, white |
| T52c | 52-pin connector, brown |
| W1 | Front interior light |
| W3 | Luggage compartment light |
| W6 | Glove compartment light |
| W43 | Rear interior light |
| B154 | Connection 1 (DCt), in interior wiring harness |
| B559 | Positive connection 1 (30g) in main wiring harness |
| * | Only models with interior monitor |
Wiring Diagram VW CADDY 2017 - Interior monitoring sensor - Vehicle inclination sender - Anti-theft alarm sensor - Alarm horn - Onboard supply control unit
| G273 | Interior monitoring sensor |
| G384 | Vehicle inclination sender |
| G578 | Anti-theft alarm sensor |
| H12 | Alarm horn |
| J519 | Onboard supply control unit |
| SC24 | Fuse 24 on fuse holder C |
| T3f | 3-pin connector, black |
| T4z | 4-pin connector, black |
| T52b | 52-pin connector, white |
| T52c | 52-pin connector, brown |
| 209 | Earth connection 6, in engine compartment wiring harness |
| 370 | Earth connection 5, in main wiring harness |
| B161 | Connection (ATA), in interior wiring harness |
| B549 | Connection 2 (LIN bus) in main wiring harness |
| * | Only models with interior monitor |
| *2 | Only models with no interior monitor |
| *3 | For models with anti-theft alarm system |
VW CADDY 2017 Overview of fuses
| Overview of fuses |
| 1 - | Fuses (SA) on fuse holder A |
| q | Fuse assignment, from June 2015 |
| 2 - | Fuses (SB) on fuse holder B |
| q | Fuse assignment, from June 2015 |
| 3 - | Fuses (SC) on fuse holder C |
| q | Fitting location right-hand drive |
| q | Fuse assignment, from June 2015 |
|
| 1 - | Fuse holder A -SA- |
| Fuse colours for MIDI strip fuse: |
| t | 200 A - purple |
| t | 150 A - grey |
| t | 125 A - pink |
| t | 100 A - blue |
| t | 80 A - white / transparent |
| t | 70 A - brown |
| t | 60 A - yellow |
| t | 50 A - red |
| t | 40 A - green |
| t | 30 A - orange |
Note:
|
| Fuses (SB) on fuse holder B |
| Fitting location of fuse holder B -SB- |
| On left in engine compartment, on E-box. |
| 1 - | Fuse holder B -SB- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
| Fuse colours for Maxi ATO flat fuse: |
| t | 60 A - blue |
| t | 50 A - red |
| t | 40 A - orange |
| t | 30 A - light green |
| t | 20 A - yellow |
|
| Fuses (SC) on fuse holder C |
| Fitting location, fuse holder C -SC- , left-hand drive |
| under dash panel on left. |
| 1 - | Fuse holder C -SC- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
|
