Wiring Diagram VW CADDY 2017 - Control unit with display for radio and navigation - Display unit for front information display and operating unit control unit - Control unit 1 for information electronics - Radio - Telephone microphone
| J503 | Control unit with display for radio and navigation |
| J532 | Voltage stabiliser |
| J685 | Display unit for front information display and operating unit control unit |
| J794 | Control unit 1 for information electronics |
| R | Radio |
| R38 | Telephone microphone |
| SB8 | Fuse 8 on fuse holder B |
| T2bv | 2-pin connector, near front interior light, black |
| T8 | 8-pin connector, black |
| T8aa | 8-pin connector, black |
| T12c | 12-pin connector, black |
| T12o | 12-pin connector, blue |
| T40 | 40-pin connector, black |
| A32 | Positive connection (30), in dash panel wiring harness |
| B605 | Connection 1, in interior wiring harness |
| B606 | Connection 2, in interior wiring harness |
| * | Only models with no start/stop system |
| *2 | Only models with basic equipment |
| *3 | Only models with start/stop system |
| *4 | According to equipment |
Wiring Diagram VW CADDY 2017 - Control unit with display for radio and navigation - Control unit 1 for information electronics - Radio - Telephone aerial
| J503 | Control unit with display for radio and navigation |
| J794 | Control unit 1 for information electronics |
| J984 | Two-way signal amplifier for mobile telephone/data services |
| R | Radio |
| R65 | Telephone aerial, in driver side exterior mirror housing |
| R127 | Telephone aerial 2 |
| R152 | Aerial for Bluetooth |
| R309 | Coupling aerial for Bluetooth mobile phone, in front centre console |
| SC21 | Fuse 21 on fuse holder C |
| T2bx | 2-pin connector, in driver side exterior mirror housing, in driver door, purple |
| T2cp | 2-pin connector |
| T2cq | 2-pin connector |
| T2cr | 2-pin connector |
| T4bd | 4-pin connector, brown |
| T4be | 4-pin connector, black |
| T12p | 12-pin connector, grey |
| T28a | 28-pin connector, in left A-pillar coupling station, black |
| 386 | Earth connection 21, in main wiring harness |
| A167 | Positive connection 3 (30a) in dash panel wiring harness |
| V32 | Positive connection (30), in telephone wiring harness |
| * | Only left-hand drive models |
| *2 | Only right-hand drive models |
VW CADDY 2017 Overview of fuses
| Overview of fuses |
| 1 - | Fuses (SA) on fuse holder A |
| q | Fuse assignment, from June 2015 |
| 2 - | Fuses (SB) on fuse holder B |
| q | Fuse assignment, from June 2015 |
| 3 - | Fuses (SC) on fuse holder C |
| q | Fitting location right-hand drive |
| q | Fuse assignment, from June 2015 |
|
| 1 - | Fuse holder A -SA- |
| Fuse colours for MIDI strip fuse: |
| t | 200 A - purple |
| t | 150 A - grey |
| t | 125 A - pink |
| t | 100 A - blue |
| t | 80 A - white / transparent |
| t | 70 A - brown |
| t | 60 A - yellow |
| t | 50 A - red |
| t | 40 A - green |
| t | 30 A - orange |
Note:
|
| Fuses (SB) on fuse holder B |
| Fitting location of fuse holder B -SB- |
| On left in engine compartment, on E-box. |
| 1 - | Fuse holder B -SB- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
| Fuse colours for Maxi ATO flat fuse: |
| t | 60 A - blue |
| t | 50 A - red |
| t | 40 A - orange |
| t | 30 A - light green |
| t | 20 A - yellow |
|
| Fuses (SC) on fuse holder C |
| Fitting location, fuse holder C -SC- , left-hand drive |
| under dash panel on left. |
| 1 - | Fuse holder C -SC- |
| Fuse colours for ATO flat fuse: |
| t | 40 A - orange |
| t | 35 A - green-blue |
| t | 30 A - light green |
| t | 25 A - transparent |
| t | 20 A - yellow |
| t | 15 A - light blue |
| t | 10 A - red |
| t | 7.5 A - brown |
| t | 5 A - light brown |
| t | 1 A - black |
|
