VW TRANSPORTER 2017 – Anti-lock brake system (ABS) with electronic stabilisation program (ESP) . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW TRANSPORTER 2017 - Battery - Brake light switch - ABS control unit - Differential lock control unit - ABS hydraulic unit - Fuse holder A - Fuse 6 on fuse holder B

A	Battery
F	Brake light switch
G294	Brake servo pressure sensor
J104	ABS control unit
J187	Differential lock control unit
J623	Engine control unit
N55	ABS hydraulic unit
SA	Fuse holder A
SA4	Fuse 4 in fuse holder A
SA5	Fuse 5 in fuse holder A
SB6	Fuse 6 on fuse holder B, in E-box
SB16	Fuse 16 on fuse holder B
T3c	3-pin connector, black
T10	10-pin connector, black, in E-box in engine compartment
T10f	10-pin connector, green, in E-box in engine compartment
T38a	38-pin connector, black
12	Earth point, on left in engine compartment
14	Earth point, on gearbox
131	Earth connection 2, in engine compartment wiring harness
624	Earth point, starter battery
640	Earth point 2, left in engine compartment
B131	Connection (54), in interior wiring harness
D50	Positive connection (30), in engine compartment wiring harness
*	see applicable current flow diagram for engine
*2	Only models with start/stop system
*3	Only models with petrol engine
*4	Only models with rear differential lock

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS control unit
J500	Power steering control unit
N55	ABS hydraulic unit
T8ag	8-pin connector, black, behind lower section of left D-pillar trim
T10k	10-pin connector, purple, in E-box in engine compartment
T17f	17-pin connector, brown, under driver seat
T38a	38-pin connector, black
D111	Connection 9 in engine compartment wiring harness
D112	Connection 10 in engine compartment wiring harness
W23	Connection 1 (sensor), in rear wiring harness
W24	Connection 2 (sensor), in rear wiring harness
W75	Connection 3 (sensor), in rear wiring harness
W76	Connection 4 (sensor), in rear wiring harness
*	Only models with double cab/ dropside and models with no all-wheel drive
*2	Only models with power assisted steering
*3	Only models with all-wheel drive, not for models with double cab/ dropside

E256	Button for TCS and electronic stabilisation program
E492	Tyre Pressure Loss Indicator button
E618	Hill descent control button
G201	Brake pressure sender 1
J104	ABS control unit
K250	Warning lamp for hill descent control
L76	Button illumination bulb
N55	ABS hydraulic unit
SB17	Fuse 17 on fuse holder B
T6e	6-pin connector, red
T6f	6-pin connector, red
T6g	6-pin connector, black
T10k	10-pin connector, purple, in E-box in engine compartment
T38a	38-pin connector, black
V64	ABS hydraulic pump
368	Earth connection 3, in main wiring harness
B282	Positive connection 6 (15a) in main wiring harness
B342	Connection 3 (58d), in main wiring harness
*	According to equipment
*2	Only models with electronic stabilisation program (ESP) and traction control system (TCS)
*3	Only models with Tyre Pressure Monitoring System

E20	Switch and instrument illumination regulator
G85	Steering angle sender
J104	ABS control unit
J519	Onboard supply control unit, behind dash panel, left
N55	ABS hydraulic unit
SC32	Fuse 32 on fuse holder C
SC51	Fuse 51 on fuse holder C
T6ac	6-pin connector, black
T10d	10-pin connector, blue, in E-box in engine compartment
T38a	38-pin connector, black
T41	41-pin connector, grey
T73a	73-pin connector, black
T73b	73-pin connector, white
368	Earth connection 3, in main wiring harness
636	Earth point, onboard supply control unit
B277	Positive connection 1 (15a) in main wiring harness
B340	Connection 1 (58d), in main wiring harness
B341	Connection 2 (58d), in main wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
D159	Connection (high bus), in engine compartment wiring harness
D160	Connection (low bus), in engine compartment wiring harness
*	Only models with no dimmable instrument illumination
*2	Only models with dimmable instrument illumination

G34	Front left brake pad wear sender
G37	Rear right brake pad wear sender
J285	Control unit in dash panel insert
J519	Onboard supply control unit, behind dash panel, left
K	Dash panel insert
K47	ABS warning lamp
K118	Brake system warning lamp
K155	Warning lamp for electronic stabilisation program and TCS
T10j	10-pin connector, dark brown, in E-box
T17f	17-pin connector, brown, under driver seat
T32	32-pin connector, blue
T73a	73-pin connector, black
68	Earth point, on left of rear cross member
86	Earth connection 1, in rear wiring harness
87	Earth connection 2, in rear wiring harness
654	Earth point, on right D-pillar
W31	Connection 1 (brake pad wear indicator), in rear wiring harness
W32	Connection 2 (brake pad wear indicator), in rear wiring harness
*	Only models with warning function for brake pad wear
*2	Not for models with double cab/ dropside
*3	Cross-section 6.0 possible
*4	Only models with double cab/ dropside
*5	Coming home with no rain sensor
*6	Only models with no tachograph
*7	Only models with no start/stop system