Wiring Diagram SEAT TOLEDO 2005 - Starter inhibitor and reversing light relay

| B | Starter |
| D | Ignition/starter switch |
| J226 | Starter inhibitor and reversing light relay |
| J361 | Simos control unit |
| M16 | Reversing light bulb, left |
| M17 | Reversing light bulb |
| S15 | Fuses in fuse box/relay plate |
| T6l | 6-pin connector, brown, in protective housing for connectors, on left in plenum chamber |
| T10 | 10-pin connector, orange, in protective housing for connectors, on left in plenum chamber |
| T10g | 10-pin connector, grey, in protective housing for connectors, on left in plenum chamber |
| |
| 114 | Earth connection, in automatic gearbox wiring harness |
| 501 | Screw connection -2- (30), on relay plate |
| A32 | Positive (+) connection (30), in dash panel wiring harness |
| A52 | Positive (+) connection -2- (30), in dash panel wiring harness |
| A87 | Connection (RL), in dash panel wiring harness |
| * | Only models with engine codes AEH |
Wiring Diagram SEAT TOLEDO 2005 - Automatic gearbox control unit - multi-function switch
Wiring Diagram SEAT TOLEDO 2005 - Automatic gearbox control unit - kick-down switch - gearbox speed sender - gearbox oil temperature sender
Wiring Diagram SEAT TOLEDO 2005 - Automatic gearbox control unit - vehicle speed sender - selector lever position P/N warning lamp - selector lever display illumination
| E204 | Tank filler flap remote release switch |
| F | Brake light switch |
| G68 | Vehicle speed sender |
| J217 | Automatic gearbox control unit |
| J285 | Control unit with display in dash panel insert |
| J492 | Four-wheel drive control unit |
| K142 | Selector lever position P/N warning lamp |
| L101 | Selector lever display illumination |
| N110 | Selector lever lock solenoid |
| S7 | Fuse in fuse box/relay plate |
| S11 | Fuse in fuse box/relay plate |
| S231 | Fuse in fuse box |
| T3g | 3-pin connector, on gearbox |
| T10g | 10-pin connector, grey, in protective housing for connectors, in plenum chamber, left |
| T68 | 68-pin connector |
| 135 | Earth connection -2-, in dash panel wiring harness |
| A2 | Positive (+) connection (15), in dash panel wiring harness |
| A4 | Positive (+) connection (58b), in dash panel wiring harness |
| B163 | Positive (+) connection -1- (15), in interior wiring harness |
| B165 | Positive (+) connection -2- (15), in interior wiring harness |
| U8 | Positive (+) connection (15a), in automatic gearbox wiring harness |
| W1 | Positive (+) connection -1- (54), in rear wiring harness |
| * | Only models allroad |
SEAT TOLEDO 2005 Overview of coupling station and connections for wiring harness
Overview of coupling station and connections for wiring harness | | |
| 1 - | Coupling station in protective housing, in plenum chamber |
| q | With connectors -T10g-, -T10d-, -T10e-, -T10-, -T6l-, -T10h-, |
| 2 - | Coupling station, right B-pillar |
| 3 - | Coupling station on left of C-pillar |
| 4 - | Coupling station on left of A-pillar |
| 5 - | Coupling station in engine compartment, in left wiring harness |
Coupling station in protective housing, in plenum chamber
| 1 - | 10-pin connector -T10g-, grey, automatic gearbox |
| 2 - | 10-pin connector, -T10d-, white, data bus wire, engine control unit, automatic gearbox, Motronic control unit, ABS control unit |
| 3 - | 10-pin connector -T10e-, black, cruise control system, Motronic control unit, engine control unit |
| 4 - | 10-pin connector -T10-, orange, reversing lights, engine control unit, starter, Climatronic control unit, Motronic control unit |
| 5 - | 6-pin connector -T6l-, brown, starter, fuel pump relay, engine control unit |
