Wiring Diagram SEAT CORDOBA 2000 - Fresh air blower switch - AC switch - fresh air/air recirculating flap switch
| E1 | Light switch |
| E9 | Fresh air blower switch |
| E35 | AC switch |
| E159 | Fresh air/air recirculating flap switch |
| J59 | X contact relief relay |
| K114 | Fresh air/air recirculating warning lamp |
| L16 | Fresh air controls light bulb |
| N24 | Fresh air blower with overheating fuse series resistor |
| SB30 | Fuse -30- in fuse box |
| T4n | 4-pin connector |
| T6j | 6-pin connector, black, on relay carrier mount |
| T6n | 6-pin connector |
| T8l | 8-pin connector |
| T10n | 10-pin connector, black |
| T10v | 10-pin connector |
| T17 | 17-pin connector, black, on light switch |
| V2 | Fresh air blower (01273-4124) |
| V154 | Fresh air/recirculating air flap control motor |
| 45 | Earth point, behind dash panel |
| 162 | Earth connection, in fan motor wiring harness |
| A4 | Positive connection (58b), in dash panel wiring harness |
| A61 | Positive connection (X), in dash panel wiring harness |
| D100 | Positive connection -2- (15), in engine compartment wiring harness |
| L45 | Connection, in air conditioner controls wiring harness |
| L66 | Connection, in heater blower wiring harness |
Wiring Diagram SEAT CORDOBA 2000 - Radiator fan control unit - air conditioner magnetic coupling - radiator fan - right radiator fan
| J293 | Radiator fan control unit (00831) |
| J361 | Simos control unit |
| J537 | Marelli 4LV control unit (injection system) |
| N25 | Air conditioner magnetic coupling (01270-4121) |
| V7 | Radiator fan (01018-3433) |
| V35 | Right radiator fan |
| T4h | 4-pin connector, black, on radiator |
| T4m | 4-pin connector |
| T5f | 5-pin connector, black, in engine compartment |
| T5g | 5-pin connector, brown, on coupling station |
| T14b | 14-pin connector |
| T121 | 121-pin connector, black |
| 12 | Earth point in engine compartment, to left |
| 193 | Earth connection -1-, in radiator fan wiring harness |
| D135 | Connection (fan speed 1), in headlight motor wiring harness |
| * | Only engines with code letters APE or AQQ |
| ** | Only engines with code letters APF |
Wiring Diagram SEAT CORDOBA 2000 - Radiator fan control unit - radiator fan thermo-switch - ambient temperature switch - high pressure sender
| A | Battery (00532) |
| D | Ignition/starter switch |
| F18 | Radiator fan thermo-switch |
| F38 | Ambient temperature switch |
| G65 | High pressure sender (00819) |
| J220 | Motronic control unit |
| J293 | Radiator fan control unit (00831) |
| J361 | Simos control unit |
| SA3 | Fuse -3- in battery fuse box |
| SA6 | Fuse -6- in battery fuse box |
| SB26 | Fuse -26- in fuse box |
| T3a | 3-pin connector, black, on battery |
| T4m | 4-pin connector |
| T5g | 5-pin connector, brown, on relay carrier mount |
| T10n | 10-pin connector, black |
| T14b | 14-pin connector |
| T121 | 121-pin connector, black |
| 193 | Earth connection -1-, in radiator fan wiring harness |
| A2 | Positive connection (15), in dash panel wiring harness |
| A15 | Positive connection (15), in instrument wiring harness |
| D61 | Connection (air conditioner), in engine compartment wiring harness |
| D135 | Connection (fan speed 1), in headlight motor wiring harness |
| K20 | Positive connection -1- (30), in radiator fan wiring harness |
| L5 | Connection -1-, in air conditioner wiring harness |
| * | Only engines with code letters APE or AQQ |
| ** | Only engines with code letters APF |
Didn't find a car made after 2014? Look here -> DiagnostData.com!
Русский
