AUDI A6 2000 – Anti-lock brake system (ABS) with electronic differential lock (EDL), traction control system (ASR/TCS) and electronic stabilisation program (ESP) . Wiring diagrams, Pin Connector, Location

Wiring Diagram AUDI A6 2000 - ABS with EDL control unit - speed sensors

D	Ignition/starter switch
E132	Traction control system switch
G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS with EDL control unit
S7	Fuse in fuse box
T10k	10-pin connector, orange, connector point, A pillar, left
T10au	10-pin connector, grey, connector point, A pillar, right
V156	Electronic stabilisation program hydraulic pump
22	Earth point, on hydraulic unit
100	Earth connection -1-, in ABS wiring harness
135	Earth connection -2-, in dash panel wiring harness
199	Earth connection -3-, in dash panel wiring harness
A2	Positive (+) connection (15), in dash panel wiring harness
J9	Connection -1- (15a), in ABS wiring harness
*	Models with front-wheel drive
**	Models with four-wheel drive
***	Both possible

F	Brake light switch
F9	Handbrake warning switch
F47	Cruise control system brake pedal switch (diesel direct injection system)
J104	ABS with EDL control unit
S13	Fuse in fuse box
S241	Fuse 41 in fuse box
S242	Fuse 42 in fuse box
T10k	10-pin connector, orange, connector point, A pillar, left
T10au	10-pin connector, grey, connector point, A pillar, right
135	Earth connection -2-, in dash panel wiring harness
199	Earth connection -3-, in dash panel wiring harness
A18	Connection (54), in dash panel wiring harness
A52	Positive (+) connection 2 (30), in dash panel wiring harness
B131	Connection (54), in interior wiring harness
*	Both possible

J104	ABS with EDL control unit
J105	ABS return flow pump relay
J106	Relay for ABS solenoid valves
N55	ABS hydraulic unit
N99	ABS inlet valve, front right
N100	ABS outlet valve, front right
N101	ABS inlet valve, front left
N102	ABS outlet valve, front left
N133	ABS inlet valve, rear right
N134	ABS inlet valve, rear left
N135	ABS outlet valve, rear right
N136	ABS outlet valve, rear left
N225	Electronic stabilisation program switch valve -1-
N226	Electronic stabilisation program switch valve -2-
N227	Electronic stabilisation program high pressure valve -1-
N228	Electronic stabilisation program high pressure valve -2-
S123	ABS control unit fuse 1
V39	ABS return flow pump
44	Earth point, lower part of left A pillar

G85	Steering angle sender
G200	Lateral acceleration sender
G202	Yaw rate sender
J104	ABS with EDL control unit
J217	Automatic gearbox control unit
J220	Motronic control unit
S16	Fuse in fuse box
T10k	10-pin connector, orange, connector point, A pillar, left
T10au	10-pin connector, grey, connector point, A pillar, right
135	Earth connection -2-, in dash panel wiring harness
199	Earth connection -3-, in dash panel wiring harness
A32	Positive (+) connection (30), in dash panel wiring harness
A121	Connection (high bus), in dash panel wiring harness
A122	Connection (low bus), in dash panel wiring harness
•	CAN bus (data wire)
*	Both possible

G201	Brake pressure sender -1-
J104	ABS with EDL control unit
J218	Combi-processor in dash panel insert
K14	Handbrake warning lamp
K47	ABS warning lamp
K86	Traction control system warning lamp
T10k	10-pin connector, orange, connector point, A pillar, left
T10au	10-pin connector, grey, connector point, A pillar, right
T16a	16-pin connector, diagnosis connection
T32	32-pin connector, blue, on dash panel insert
T32a	32-pin connector, green, on dash panel insert
A19	Connection (58s), in dash panel wiring harness (switch illumination)
A76	Connection (diagnosis wire K), in dash panel wiring harness
A120	Connection (stationary time), in dash panel wiring harness
A127	Connection (rear left speed sensor), in dash panel wiring harness
A128	Connection (rear right speed sensor), in dash panel wiring harness
*	Models with navigation system