AUDI A6 2000 – Cruise control system for petrol engines with manual electric throttle operation . Wiring diagrams, Pin Connector, Location

Wiring Diagram AUDI A6 2000 - Cruise control system

F36	Clutch pedal switch
F47	Cruise control system brake pedal switch (diesel direct injection system)
G21	Speedometer
G22	Speedometer sender (Hall sender, on gearbox)
J213	Cruise control system control unit
J218	Combi-processor in dash panel insert
T6c	6-pin connector, black, connector point left A-pillar
T10p	10-pin connector, black, connector point, electronics box, plenum chamber
T32	32-pin connector, blue, on dash panel insert
V18	Vacuum pump for automatic speed control
85	Earth connection -1-, in engine compartment wiring harness
213	Earth connection -4-, in dash panel wiring harness
A108	Connection (speed signal), in dash panel wiring harness
*	Models with manual gearbox
**	Models with automatic gearbox
***	With engines from 110 kW

D	Ignition/starter switch
E45	Cruise control system switch
F	Brake light switch
F125	Multi-function switch
J217	Automatic gearbox wiring harness
M9	Brake light bulb, left
M10	Brake light bulb, right
S11	Fuse in fuse box
S13	Fuse in fuse box
S231	Fuse 31 in fuse box
T10q	10-pin connector, black, on cruise control system switch
T10w	10-pin connector, blue, connector point, A pillar, right
T15r	15-pin connector, blue, connector point, A pillar, right
A2	Positive (+) connection (15), in dash panel wiring harness
A18	Connection (54), in dash panel wiring harness
A38	Positive (+) connection -2- (15a), in dash panel wiring harness
A52	Positive (+) connection -2- (30), in dash panel wiring harness
U3	Connection -1-, in automatic gearbox wiring wiring harness
*	Models with manual gearbox
**	Models with automatic gearbox 01N
***	Models with automatic gearbox 01V