Wiring Diagram AUDI A8 2002 - Electrically operated rear roller blind
| E94 | Heated driver's seat adjuster |
| E149 | Rear roller blind switch |
| J262 | Rear roller blind control unit |
| L77 | Rear roller blind switch illumination |
| S10 | Fuse in fuse carrier |
| T2l | 2-pin connector, connection for rear roller blind motor |
| T3aa | 3-pin connector, black, under rear seat, right |
| T10m | 10-pin connector, grey, footwell, right, at wheelhouse, behind carpet |
| V91 | Rear roller blind motor |
| 43 | Earth point, lower part of right A-pillar |
| B100 | Earth connection, in interior wiring harness, front right |
| B104 | Earth connection (rear right), in interior wiring harness |
| B115 | Positive (+) connection (30, central electrics), in interior wiring harness |
| B116 | Connection (58s), in interior wiring harness |
Wiring Diagram AUDI A8 2002 - Electrically operated rear roller blind
| D | Ignition/starter switch |
| J285 | Control unit with display in dash panel insert |
| S4 | Fuse in fuse carrier |
| T6t | 6-pin connector, red, footwell, right, at wheelhouse, behind carpet |
| T32b | 32-pin connector, grey, on dash panel insert |
| A2 | Positive (+) connection (15), in dash panel wiring harness |
| A19 | Connection (58s), in dash panel wiring harness (switch illumination) |
| B163 | Positive (+) connection -1- (15), in interior wiring harness |
| W8 | Connection(15a), in rear wiring harness |
Can't find your car? Check -> DiagnostData.com!
