Wiring Diagram AUDI A8 2000 - ABS with EDL control unit - ABS control unit fuse - speed sensor
| A | Battery |
| G45 | Front right speed sensor |
| G47 | Front left speed sensor |
| J104 | ABS with EDL control unit |
| J105 | ABS return flow pump relay |
| J106 | Relay for ABS solenoid valves |
| S123 | ABS control unit fuse 1 |
| S204 | Fuse -1- (30) |
| T4ad | 4-pin connector, black, in engine compartment, left |
| T4ae | 4-pin connector, black, in engine compartment, right |
| D68 | Positive (+) connection (30 - for ABS), in engine compartment wiring harness |
| * | Models with front-wheel drive |
| ** | Models with four-wheel drive |
Wiring Diagram AUDI A8 2000 - ABS with EDL control unit - valve
| G44 | Rear right speed sensor |
| G46 | Rear left speed sensor |
| J104 | ABS with EDL control unit |
| K | Diagnosis connection |
| N99 | ABS inlet valve, front right |
| N100 | ABS outlet valve, front right |
| N101 | ABS inlet valve, front left |
| N102 | ABS outlet valve, front left |
| N133 | ABS inlet valve, rear right |
| N134 | ABS inlet valve, rear left |
| N135 | ABS outlet valve, rear right |
| N136 | ABS outlet valve, rear left |
| N166 | EDL change-over valve, front right |
| N167 | EDL outlet valve, front right |
| N168 | EDL change-over valve, front left |
| N169 | EDL outlet valve, front left |
| T16a | 16-pin connector, diagnosis connection |
| 44 | Earth point, lower part of left A-pillar |
| A76 | Connection (diagnosis wire K), in dash panel wiring harness |
Wiring Diagram AUDI A8 2000 - ABS with EDL control unit - combi-processor in dash panel insert
| J104 | ABS with EDL control unit |
| J218 | Combi-processor in dash panel insert |
| J402 | Operating electronics control unit, navigation |
| T10d | 10-pin connector, red, connector point, electronics box, plenum chamber |
| T15 | 15-pin connector, brown, in centre console |
| T26c | 26-pin connector, on operating electronics control unit, navigation |
| T32b | 32-pin connector, grey, on dash panel insert |
| 108 | Earth connection -2-, in front left wiring harness |
| A121 | Connection (high bus), in dash panel wiring harness |
| A122 | Connection (low bus), in dash panel wiring harness |
| A150 | Connection (data bus, screening), in dash panel wiring harness |
| • | CAN bus (data wire) |
| * | Models with traction control system |
| ** | Models with radio navigation system |
Wiring Diagram AUDI A8 2000 - ABS with EDL control unit - brake light switch - traction control system switch
| D | Ignition/starter switch |
| E132 | Traction control system switch |
| F | Brake light switch |
| J104 | ABS with EDL control unit |
| J218 | Combi-processor in dash panel insert |
| J220 | Motronic control unit |
| S9 | Fuse in fuse carrier |
| S10 | Fuse in fuse carrier |
| T10c | 10-pin connector, green, connector point, electronics box, plenum chamber |
| T32b | 32-pin connector, grey, on dash panel insert |
| A2 | Positive (+) connection (15), in dash panel wiring harness |
| A18 | Connection (54), in dash panel wiring harness |
| A19 | Connection (58s), in dash panel wiring harness (switch illumination) |
| E109 | Connection (30, central electrics), in dash panel wiring harness |
| E115 | Earth connection (centre console), in dash panel wiring harness |
| B235 | Positive (+) connection -4- (15a), in interior wiring harness |
| * | Models with traction control system |
| ** | Models with 2.8 l engine and four-wheel drive |
Не нашел свой автомобиль? смотри здесь -> DiagnostData.com!
