AUDI A4 1995 – Anti-lock brake system with front-wheel drive . Wiring diagrams, Pin Connector, Location

Wiring Diagram AUDI A4 1995 - Anti-lock brake system with front-wheel drive

D	Ignition/starter switch
F	Brake light switch
G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS with EDL control unit
J192	Multi-point injection control unit
J218	Combi-processor in dash panel insert
S7	Fuse in fuse box
S13	Fuse in fuse box
T10b	10-pin connector, orange, left connector point, A pillar
T10z	10-pin connector, brown, connector point, electronics box, plenum chamber
T16	16-pin connector, (diagnosis connection) in centre console rear
T26a	26-pin connector, blue, on dash panel insert
A2	Positive (+) connection (15), in dash panel wiring harness
A18	Connection (54), in dash panel wiring harness
A32	Positive (+) connection (30), in dash panel wiring harness
A76	Connection (diagnosis wire K), in dash panel wiring harness
44	Earth point, lower part of left A-pillar
*	Only with 2.8 l MPI 128 kW, 6 cylinder
**	Only with 2.6 l MPI 110 kW, 6 cylinder

J104	ABS with EDL control unit
J105	ABS return flow pump relay
J106	Relay for ABS solenoid valves
N55	ABS hydraulic unit
N99	ABS inlet valve, front right
N100	ABS outlet valve, front right
N101	ABS inlet valve, front left
N102	ABS outlet valve, front left
N133	ABS inlet valve, rear right
N134	ABS inlet valve, rear left
N135	ABS outlet valve, rear right
N136	ABS outlet valve, rear left
S53	ABS hydraulic pump fuse
S241	Fuse in fuse box
T10b	10-pin connector, orange, left connector point, A pillar
V39	ABS return flow pump
A32	Positive (+) connection (15), in dash panel wiring harness
22	Earth point, on hydraulic unit