767 in the version without integrated radio-telephone-navigator, the car can be fitted with the preparation for the installation of a mobile phone 3023410SeeE3580PREPARATION FOR CELLULAR TELEPHONE .
This system includes:GSM module and SIM-CARD reader integrated in the radio-telephone-navigator;hands-free function via the radio speakers;microphone located in the front courtesy light;outside aerial.An additional outside telephone receiver can be fitted, on request, which switches automatically to the radio-telephone system.The integrated radio-telephone-navigator is a node of the CAN network through which it exchanges information with the Body Computer and other electronic units.The commands of the telephone function are grouped together on a conventional telephone keyboard (12 buttons), with in addition dedicated keys for emergency call.The commands are displayed on the integrated radio-telephone-navigator display.Some versions have a set of buttons located on the steering wheel: these, in addition to the radio controls, allow commands to be sent for the telephone function.There is also the 'voice recognition' function: this is an internal voice recognition module which acquires the commands received from the microphone and interprets them, sending them to the telephone unit proper.Some commands made by the user while using the telephone are repeated on the instrument panel ('HIGH' version).The fishpole antenna is mounted at the rear of the roof: this is a two-function aerial with two cables: one is the actual radio aerial, and one is the telephone cable with dual reception band (GSM-ETACS at 900 Hz and D.C.S. at 1800 Hz). If the navigator is also installed 3023435SeeE4091CONNECT , the aerial has three functions (radio/GSM/GPS). For more details on the operation of the telephone 3022537Characteristic of working principle5580Nintergrated control system (ics) panel .
Functional description The integrated radio-telephone-navigator P20 is supplied directly (7 of connector A) by the battery via the line of fuse F39 of the unit under the dashboard B2 and maxifuse CPL of B99 . The supply to side lights on reaches pin 4 of connector A 3023264SeeE2530INSTRUMENT LIGHTING . Pins 1 and 3 of connector A receive the CAN line with which the display P20 is connected to the Body Computer M1 and the other nodes of the system. Pin 8 of connector A is earthed. The aerial P25 is supplied from pin 5 of connector A. The GSM aerial is connected to the telephone function also via the appropriate coaxial cable. Connector B of P20 is the source of the cables carrying signals to the loudspeakers used for the hands-free function 3023350SeeE3510RADIO . Pins 10 and 11 of connector C of P20 are connected to the steering wheel controls: the connection is via the clock spring D47 ; the device which controls the control buttons receives a supply controlled by the ignition (INT) from the line protected by fuse F51 of the unit under the dashboard B2 , while the reference earth comes from pin 12 of connector C of P20 . Pins 9 and 18 of connector D of P20 are connected to the microphone P26 ; pin 12 of connector D is earthed. The external telephone receiver P27 is supplied via the line of fuse F39 of the unit under the dashboard B2 , and is connected to connector D of P20 , at pins 6, 7, 8, 16 and 17.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025802-7040A37fuse box cover - r r1. Disconnect the electrical connections at the front (1a, 1b, 1c,1d, 1e, 1f).2. Undo the bolts fixing the control unit.3. Undo the bolts shown fixing the dashboard cover.2004865
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Ensure that the ignition key is in the OFF position, then disconnectthe negative battery terminal (-).2. Open the maxi fuse box cover.3. Undo the bolts securing the 'maxi-fuse' box to the battery.4. Loosen the bolt fixing the battery terminal (+).5. Release the maxi fuse box from the battery and move it to theside.2004975
5530B14
Follow these precautions:769768768
5530B18
Follow these precautions.769On batteries with an opticam hydrometer,electrolyte level and battery charge status can be monitored qualitativelyby examining the indicator colour: a light, bright colour indicates low electrolytelevel: top up with distilled water;a dark colour without a green area in thecentre indicates that the electrolyte level is correct but chargeis low: recharge the battery; a dark colour with a green area in themiddle indicates that both electrolyte level and charge status arecorrect: no action is necessary. For further details, see DESCRIPTION ANDOPERATION - 5580.768Proceed as follows.Check the battery voltage without loadusing the test device recommended by the Service outlets (e.g. 'MICRO360'). Depending on the voltage values measured,which define the state of charge of the battery, proceed as follows:If the voltage without load is less than12.10 V, replace the battery (see op.). 5530B10).If the voltage without load is over 12.10V but less than 12.50 V, recharge the battery (see op. 5530B14).If the voltage without load is over 12.50V, the battery is efficient.If necessary, top up the electrolyte asfollows.Carefully remove the cap strip.Top up with distilled and deionized water,taking care not to allow electrolyte to splash out.768
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Place the vehicle on a lift.Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2004980
5530B40
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Open the bonnet lid.1. Release the retainers (1a) and remove the cover (1b).2004986
5530B52
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Proceed with removal 3025534-5530B10battery - r+r .1. Remove the relay/fuse box cover.2. Undo the nut (2a) and disconnect the earth lead (2b) from therelay-fuse box.2004990
5530B60
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025534-5530B10battery - r+r1. Remove the battery drip tray.2. Unscrew bolts (2a) and loosen bolt (2b) securing the batterycradle.3. Move the battery cradle aside.4. Release the belt retaining stud.5. Remove the belt.2005002
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025620-5580E08aerial for alpha code- r r1. Disconnect the electrical connections (1a, 1b) from the ignitionswitch.2. Use a drift and undo the headless bolts (2a); remove the ignitionswitch (2b).7682004913
5520A14
769
5520A16
769
5520A18
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. If necessary, regulate the steering wheel height adjustment lever.2. Undo the bolts fixing the lower trim.3. Remove the lower trim, releasing it from the inner retainersand the steering wheel.2004920
Controls for headlamp alignment, instrument lighting adjustment
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Release the retainers for the switch panel from the dashboardtrim.2. Disconnect the electrical connections.3. Recover the switch panel.2005045
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025595-5570T61multi-function aerial- r r1. Disconnect the electrical connections.2. Disconnect the aerial lead connection.3. Undo the special nut.4. Remove the aerial mount with leads.2005046
5570T61
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Unscrew the aerial.2005048
5570T66
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025611-5580C18air bag module - r+r7681. Disconnect the electrical connections.2. Remove switch panel (2a) by undoing retainers (2b).2005049
5570T80
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Use the radio removal toolssupplied.1. Fit both tools into the slots on the front of the radio and pushin until the mechanism holding the radio in place clicks open. 2005050
5570T85
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Open the tailgate.1. Unscrew the audio CD player bolts.2005053
5570T89
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213025598-5570T85cd/audio player loader- r r1. Remove the moveable floor cover.2. Undo the bolt and remove the retaining ring.2005055
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Work with caution 7693025653-7005C44interior handle panel - r r1. Rotate the tweeter in an anti-clockwise direction and removeit.2005059
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Fit the tools in the special housings in Connect panel, makingsure that they are correctly attached. 2005103
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Čeština
Dansk
Deutsch
Ελληνικά
English
Español
Suomi
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
