DescriptionA special relay controls the operation ofthe tailgate lock release actuator, which is operated by a remotecontrol unit in the key (via a special button).The boot release circuit is protected bya dedicated shunt fuse.
Functional description When a special button on the key is operated,a boot opening signal is sent to remote control receiver M35,which sends an earth signal to boot opening relay J56 that in turnsupplies boot lock motor N57 via a line protected by fuse F6 ofsupplementary fuse box B98 C.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213238793-7040A26steering column trim- r+r3238799-7040A37fuse box cover - r r1. Disconnect the antenna connection from the power unit.2. Remove the antenna from the starting block.3. Free the cable from the check clamps.4. Remove the antenna unit.2018926
5580E12
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213238799-7040A37fuse box cover - r r1. Unscrew the shunt power unit screws .2. Remove the shunt power unit.3. Disconnect the anti-theft device power unit.4. Remove the anti-theft device power unit.5. Disconnect the electric connection.6. Disconnect thel'antenna connection.2018927
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213238843-7040H38central pillar upperelement - r r1. Prise the volumetric sensor from its seat in the pillar trim.2018930
5580E24
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213238799-7040A37fuse box cover - r r1. Disconnect electrical connections (1a), (1b).2. Undo the nut.3. Remove the switch and bridge.2018931
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Open the bonnet lid and remove the buttons retaining the uppertrim using the special tool.2. Lower the upper trim and disconnect the electrical connectionfor the receiver.3. Unscrew the nuts.4. Remove the receiver.2018932
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213238964-7055B42Additional FRONT WHEELARCH (one), left or right - R.R.1. Unscrew the control unit bracket retaining nuts.2. Move control unit bracket (2a) and disconnect electrical connections(2b, 2c).3. Unscrew the nuts retaining the control unit to the bracket.4. Recover the control unit by taking off its bracket.2018935
Русский
