Fiat BRAVO 1.9 JTD 8v – SIDE LIGHTS / NO. PLATE LIGHTS – – Xenon Gas headlamps – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

WIRING DIAGRAM - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat BRAVO 1.9 JTD 8v

SIDE LIGHTS/NUMBER PLATE LIGHT - WIRING DIAGRAM Fiat BRAVO 1.9 JTD 8v

Obtenha acesso a todos os diagramas de fiação do carro

COMPONENTS - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat BRAVO 1.9 JTD 8v

Component code	Description	Reference to the operation
B002	JUNCTION UNIT UNDER DASHBOARD
B099	MAXI FUSE BOX ON BATTERY	-
C010	LEFT FRONT EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C030	LEFT REAR EARTH	-
C038	EARTH ON CENTRE TUNNEL	-
D212	BUMPER/REAR COUPLING	-
E050	INSTRUMENT PANEL
F010	LEFT HEADLAMP
F011	RIGHT HEADLAMP
F030	LEFT REAR LIGHT CLUSTER
F031	RIGHT REAR LIGHT CLUSTER
F050	LEFT NUMBER PLATE LIGHT
F051	RIGHT NUMBER PLATE LIGHT
H001	IGNITION SWITCH
H005	STEERING COLUMN SWITCH UNIT
K125	RAIN AND DUSK SENSOR
M001	BODY COMPUTER

COMPONENT LOCATION - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat BRAVO 1.9 JTD 8v

SIDE LIGHTS/NUMBER PLATE LIGHT - COMPONENT LOCATION Fiat BRAVO 1.9 JTD 8v

Obtenha acesso a todos os diagramas de fiação do carro

Component code	Description	Reference to the operation
B002	JUNCTION UNIT UNDER DASHBOARD
B099	MAXI FUSE BOX ON BATTERY	-
C010	LEFT FRONT EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C030	LEFT REAR EARTH	-
C038	EARTH ON CENTRE TUNNEL	-
D212	BUMPER/REAR COUPLING	-
E050	INSTRUMENT PANEL
F010	LEFT HEADLAMP
F011	RIGHT HEADLAMP
F030	LEFT REAR LIGHT CLUSTER
F031	RIGHT REAR LIGHT CLUSTER
F050	LEFT NUMBER PLATE LIGHT
F051	RIGHT NUMBER PLATE LIGHT
H001	IGNITION SWITCH
H005	STEERING COLUMN SWITCH UNIT
K125	RAIN AND DUSK SENSOR
M001	BODY COMPUTER

DESCRIPTION - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat BRAVO 1.9 JTD 8v

The side lights come on when the ring nut on the steering column switch unit left lever is turned to the first position.The switching on of the side lights is managed by the Body Computer.The side light control function takes place with the key ON, or with the key OFF for parking lights and follow-me-home function.The number plate light and numerous other interior lights for lighting the passenger compartment, instruments and controls are activated together with the side lights (these are described and explained in the wiring diagrams for the relevant components), in particular:Activation/deactivation information is sent via the CAN: in this way, the side lights warning light in the instrument panel is also activated.On some versions, the side lights are also activated automatically by the dusk sensor.This sensor, located on the windscreen under the interior rear view mirror, detects the variations in outside brightness depending on the light setting: the greater the sensitivity, the less external light is required to activate the exterior lights.The setting of the dusk sensor can be adjusted using the instrument panel setup menu.When the ring nut is turned in the opposite direction (AUTO position) the side lights and the dipped headlamps automatically come on simultaneously depending on the exterior brightness.The flashing function is only possible with the sensor activated.When the command to switch off is given by the sensor, the main beam headlamps are deactivated and then the side lights about 10 seconds later.The parking lights function makes it possible to switch on the side lights and the no. plate lights with the ignition OFF, to signal the presence of the vehicle whilst it is parked.They can only be activated with the ignition OFF by turning the ring nut from OFF to the first position. When the direction indicator lever is activated the lights on one side only (left or right) can be selected.The function is deactivated by moving the steering column switch unit lights ring nut to the OFF position or at the vehicle Key ON. This last operation resets the function and the Body Computer controls the lights depending on the command selected using the steering column switch unit ring nut.The "Follow me home" function allows the dipped headlamps and the side lights to remain on even after the engine has been switched off (key in OFF position) for a period of 30 seconds or multiples thereof. The side lights warning light in the instrument panel signals that the lights have remained on. It is turned on using the lever in the same way as for activating the flasher within 2 minutes of the ignition being switched OFF: each time the lever is operated the length of time the lights remain on is increased by 30 seconds, up to a maximum of 210 seconds. Inserting the TEG or keeping the flasher lever pulled for more than 2 seconds eliminates the function.The correct operation of the lights is checked by the side lights and no. plate lights check function: the following is checked for each of the circuits:- circuit open or bulb missing- short-circuit to earth (bulb s.c. or wiring s.c. to earth)- short circuit to battery voltage (wiring short circuited to Vbatt)When one of the situations described above is ascertained, the Body Computer makes the failure status available to the CAN: a special "lights failure" warning light comes on in the instrument panel and, at the same time, the information is shown in the display.If a fault is detected with the dusk sensor, the "general failure" warning light is turned on and the information is shown simultaneously on the display.

FUNCTIONAL DESCRIPTION - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat BRAVO 1.9 JTD 8v

The side lights activation signal is sent to pin 28 of connector G of the Body Computer M1 from the steering column switch unit H5The Body Computer M1 receives a direct supply from the battery via the line protected by maxifuse B99 at pin 18 of connector F of the interface with the junction unit under the dashboard B2; the ignition-controlled supply (INT) reaches pin 9 of connector F of the interface with the junction unit B2.The side lights are also activated if the dusk sensor K125 is present (A-BUS signal from pin 10 of connector D of M1) and the AUTO function is set at the steering column switch unit H5 (signal at pin 4 of connector I of M1).The dusk sensor K125 receives a power supply from the INT line protected by fuse F49 of junction unit B2.The Body Computer M1 controls the supply for the front side lights F10 (left) and F11 (right) from pins 52 and 39 of connector B, for the rear side lights F30 (left) and F31 (right) from pins 8 and 9 of connector D and lastly the number plate lights F50 and F51 from pin 12 of connector D.Via the CAN line, the Body Computer M1 is connected to instrument panel E50 to manage the side lights on warning light and, if faults are detected in the circuit or in the bulbs, the lights failure warning light; in the vent of a fault with the dusk sensor there is a specific signal.