Čeština
Dansk
Deutsch
Ελληνικά
English
Español
Suomi
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
Components - SIDE LIGHTS / NO. PLATE LIGHTS - Fiat DOBLO 1.6 16v da 12/03
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C10 | LEFT FRONT EARTH | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| C030 | LEFT REAR EARTH | |
| D085 | TAILGATE/REAR SEAL | |
| E50 | INSTRUMENT PANEL | |
| F010 | LEFT HEADLAMP | |
| F011 | RIGHT HEADLAMP | |
| F030 | LEFT REAR LIGHT CLUSTER | |
| F031 | RIGHT REAR LIGHT CLUSTER | |
| F50 | LEFT NUMBER PLATE LIGHT | |
| F51 | RIGHT NUMBER PLATE LIGHT | |
| H001 | IGNITION SWITCH | |
| H5 | STEERING COLUMN SWITCH UNIT | |
| M001 | BODY COMPUTER |
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C10 | LEFT FRONT EARTH | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| C030 | LEFT REAR EARTH | |
| D085 | TAILGATE/REAR SEAL | |
| E50 | INSTRUMENT PANEL | |
| F010 | LEFT HEADLAMP | |
| F011 | RIGHT HEADLAMP | |
| F030 | LEFT REAR LIGHT CLUSTER | |
| F031 | RIGHT REAR LIGHT CLUSTER | |
| F50 | LEFT NUMBER PLATE LIGHT | |
| F51 | RIGHT NUMBER PLATE LIGHT | |
| H001 | IGNITION SWITCH | |
| H5 | STEERING COLUMN SWITCH UNIT | |
| M001 | BODY COMPUTER |
The side lights come on at the first click of a wheel on the stalk switch, on with key ON.They may also be turned on by removing the key and turning backward - PARK position - while keeping a special button depressed.The number plate light and numerous other interior lights for lighting the passenger compartment, instruments and controls are activated together with the side lights (these are described and explained in the wiring diagrams for the relevant components).The side light circuit is protected by special fuses located in the engine bay junction unit and in the under-facia junction unit.A warning light on the instrument panel indicates when the side lights are on.In the Comfort version of the instrument panel, a side light and number plate light check function is available.Any faults are recognised by vehicle branch (right or left side). In this case, the Body Computer sends the fault status to the instrument panel via the CAN line. An exterior lighting warning light comes on on the panel and the information is shown simultaneously on the display.
The side light activation signal reaches ignition switch H01 (STAZ) connector B pin 4 of stalk unit H05 when the stalk is switched to close the circuit between connector B pin 5 and connector B pin 6.Stalk unit H05 receives a power supply from fuse F32 in under-dashboard junction unit B02 and an additional fuse in engine compartment junction unit B01.When ignition switch H01 is set to STAZ, the body computer receives a power supply from H01 (POS) to activate the front and rear side lights and the number plate light via under-dashboard junction unit B02 pin 2 connector E.For front lights F10 and F11, the power supply is received from pins 40 and 30 connector C of the body computer; from pins 5 and 6 connector A for tail-lights F30 and F31.The power supply to number plate light unit F50 and F51 is protecteed by fuse F51 positioned in under-dashboard junction unit B02.Body computer M01 supplies the device built into instrument panel E50 via connector F (pins 31 and 36).The body computer is supplied via pin 11 connector E of junction unit B02 from ignition switch H01 (INT) and via a line protected by fuses F53 and F1 contained in control unit B02 and B01 and lastly directly from teh battery via a fuse F1 in engine compartment junction unit B01.The supply lines that reach junction unit B02 via pin 11 connector E and pin A connector C also supply control panel E50 via two lines protected by fuses F37 and F53.Pins 8 and 9 of connector D of the body computer are earthed.
