Čeština
Dansk
Deutsch
Ελληνικά
English
Español
Suomi
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
Wiring diagram - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
COMPONENTS - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
| Component code | Name | Assembly reference |
| A1 | Battery | |
| A1 | Battery | |
| B1 | Engine compartment junction unit | - |
| B1 | Engine compartment junction unit | |
| B2 | Junction unit under dashboard | |
| D28 | Engine cables/radiator cable coupling | - |
| D28 | Engine cables/radiator cable coupling | |
| K30 | Insufficient engine oil pressure (switch) sensor | |
| K45 | Engine temperature sensor for i.e. | |
| M10 | Engine management ECU | |
| N11 | Engine electric fan motor | |
| N11 | Engine electric fan motor | |
| N12 | Engine electric fan motor | |
| N12 | Engine fan motor -2 | |
| O10 | Engine fan adjustment resistor |
Location of components - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
COMPONENTS - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
Description - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
Functional description - ENGINE COOLING - Fiat DOBLO 1.6 16v da 12/03
The supply for the fan N11 arrives directly from the battery via relay R6 housed in the engine compartment junction unit B01 from the line entering at pin 1 connector A of the actual unit.This supply line is protected by fuse F6 housed in the junction unit B01 .The relay R6 is enerigzed by an earth signal coming from the engine management control unit M10 . The engine temperature sensor K45 measures the temperature of the engine coolant and, if the values for this parameter are high, the control unit M10 sends an earth signal from pin 8 of connector B (1242 8 V engine; in the case of the 1596 16V version, the energizing signal for the relay R6 comes out of the engine management control unit at pin 55 of connector A) and an earth signal to the relay which energizes the coil. The relay sends the supply to the fan N11 from pin C connector C of the junction unit B01 .
