Čeština
Dansk
Deutsch
Ελληνικά
English
Español
Suomi
Français
Français
עברית
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
Components - HEATED SEATS - Fiat DOBLO 1.6 16v da 12/03
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| H001 | IGNITION SWITCH | |
| I65 | DRIVER''S SEAT HEATING SWITCH | |
| M001 | BODY COMPUTER | |
| O40 | LEFT SEAT HEATER |
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| H001 | IGNITION SWITCH | |
| I65 | DRIVER''S SEAT HEATING SWITCH | |
| M001 | BODY COMPUTER | |
| O40 | LEFT SEAT HEATER |
The front seats are available, on request, with a special heating system (comprising two heating elements located in the cushion and the backrest): this allows the seat to be heated to overcome the discomfort of cold passenger compartments in very harsh climates, e.g. when the car is left in the open for long periods in winter.The seat heating circuit is operated by a switch on the seat and protected by a special fuse and controlled by a relay that supplies other ignition-operated services.
The seat heating circuit is controlled by relay R13 of under-dashboard junction unit B02.This is supplied directly by the battery via a line protected by fuse F2 contained in engine compartment control unit B01.The coil excitation signal consists of an earth signal leaving pin 14 of connector X of body computer M01.The power supply leaving relay R13 flows through fuse F45 and leaves under-dashboard junction unit B02 from pin 4 connector D.This sigal then reaches pin 2 of switch I65 contained in the driver''s side seat.When the switch is turned on, the power supply reaches heat pad O40, which heats the seat.The heat pad is earthed via pin 1.Operation of switch I65 also determines activation of the led in the switch.
