Components - ELECTRIC FRONT WINDOWS - Fiat DOBLO 1.4 8v Fino a 10/2000
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| D30 | REAR/DRIVER''S FRONT DOOR COUPLING | |
| D31 | REAR/PASSENGER FRONT DOOR COUPLING | |
| H001 | IGNITION SWITCH | |
| H90 | SWITCH CONTROL UNIT | |
| M001 | BODY COMPUTER | |
| N60 | DRIVER''S FRONT DOOR ELECTRIC WINDOW MOTOR | |
| N61 | PASSENGER FRONT DOOR ELECTRIC WINDOW MOTOR |
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B2 | JUNCTION UNIT UNDER DASHBOARD | |
| C15 | DASHBOARD EARTH, DRIVER''S SIDE | |
| D30 | REAR/DRIVER''S FRONT DOOR COUPLING | |
| D31 | REAR/PASSENGER FRONT DOOR COUPLING | |
| H001 | IGNITION SWITCH | |
| H90 | SWITCH CONTROL UNIT | |
| M001 | BODY COMPUTER | |
| N60 | DRIVER''S FRONT DOOR ELECTRIC WINDOW MOTOR | |
| N61 | PASSENGER FRONT DOOR ELECTRIC WINDOW MOTOR |
The front door windows are operated by switches located in the middle of the dashboard.Operation is manual: the glass goes up/down only with the key pressed. Both windows are only operated only with the key ON.On some versions if the driver''s electric window button is pressed for more than half a second the automatic operation is activated: the window stops when it reaches the end of travel position or if the button is pressed again.The operation is allowed for a further two minutes after having turned the ignition key from ON to OFF, but only with the doors closed.The electric windows circuit is protected by two special fuses, one for the driver''s side and one for the passenger side and is controlled by a special relay, located in the junction unit under the dashboard.
The operation of the front electric windows circuit receives a power supply from electric windows relay R13.The latter receives a power supply from the direct line from the battery protected by fuse F2 housed in the engine compartment junction unit B01 and is energized thanks to an earth signal coming out of the body computer M01.When energized the relay supplies control unit M90 (pins 5 and 3 connector C) via two lines protected by fuses F47 and F48 of the junction unit under the dashboard B02 (pins 20 and 19 connector E).The signals for the driver''s electric window motor leave pins 6 and 7 connector C of the control unit H90, whilst those for the passenger electric window motor leave pins 1 and 4 connector C. Pins 2 and 8 connector C are earthed.The body computer M01 receives a supply controlled by the ignition (INT)and a direct supply at pins 11 of connector E and pin A of connector C, respectively of the junction unit under the dashboard B02.There is a protective fuse F1 for the direct power supply located in the engine compartment junction unit B01.Pins 8 and 9 of connector D of the body computer are earthed.
