Wiring Diagram - DIPPED HEADLAMPS - Fiat DUCATO 2.0 16V fino a 02/05
Components - DIPPED HEADLAMPS - Fiat DUCATO 2.0 16V fino a 02/05
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| C010 | LEFT FRONT EARTH | - |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| F010 | LEFT HEADLAMP | |
| F011 | RIGHT HEADLAMP | |
| H005 | STEERING COLUMN SWITCH UNIT | |
| H090 | SWITCH CONTROL PANEL | |
| - |
Location Components - DIPPED HEADLAMPS - Fiat DUCATO 2.0 16V fino a 02/05
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| C010 | LEFT FRONT EARTH | - |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| F010 | LEFT HEADLAMP | |
| F011 | RIGHT HEADLAMP | |
| H005 | STEERING COLUMN SWITCH UNIT | |
| H090 | SWITCH CONTROL PANEL | |
| - |
Description - DIPPED HEADLAMPS - Fiat DUCATO 2.0 16V fino a 02/05
The vehicle is equipped with two specific dipped beam headlamps.The dipped beams are activated by turning a wheel on the stalk switch to the next position after the side light setting (second position).The dipped beams stay on even with the main beams on and are turned of by turning on the fog lamps.The circuit is protected by two special fuses: one for the right headlamp and one for the left.The dipped beam circuit also enables the operation of certain other functions, e.g. rear fog lamp activation and headlamp alignment control.
Operational Description - DIPPED HEADLAMPS - Fiat DUCATO 2.0 16V fino a 02/05
The dipped beams are activated by an earth signal from stalk unit H005 when the wheel is operated and reach control panel H090 at pin 17 connector D.Once a dipped beam activation command is received, control panel H090 excites T02 inside engine bay junction unit B001, from pin 8 connector A at pin 12 connector C of the junction unit. The relay then supplies power to front headlamps F010 and F011 via fuses F15 and F14 located in engine bay junction unit B001.The left headlamp signal is used to operate the headlamp alignment corrector (see E3080).
