Wiring Diagram - WINDSCREEN WASH/WIPE - Fiat DUCATO 2.8 JTD 8V fino a 02/05
Components - WINDSCREEN WASH/WIPE - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| C010 | LEFT FRONT EARTH | - |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| H005 | STEERING COLUMN SWITCH UNIT | |
| N015 | WINDSCREEN WIPER MOTOR | - |
| N020 | ELECTRIC WINDSCREEN WASHER PUMP MOTOR | |
| - |
Location Components - WINDSCREEN WASH/WIPE - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B001 | JUNCTION UNIT | |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| C010 | LEFT FRONT EARTH | - |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| H005 | STEERING COLUMN SWITCH UNIT | |
| N015 | WINDSCREEN WIPER MOTOR | - |
| N020 | ELECTRIC WINDSCREEN WASHER PUMP MOTOR | |
| - |
Description - WINDSCREEN WASH/WIPE - Fiat DUCATO 2.8 JTD 8V fino a 02/05
The system is operated with the key ON.The windscreen wiper system is operated by the stalk switch located to the right of the steering wheel.This stalk may be moved to five different positions that correspond to the following functions:
Operational Description - WINDSCREEN WASH/WIPE - Fiat DUCATO 2.8 JTD 8V fino a 02/05
The enginebay junction unit is supplied directly by battery control unit B099, at connector F, pin 1.This power supply flows through internal fuse F08 and reaches relay T08. Relay coil T08 is earthed - from pin 26 connector C - and supplied with key on - from pin 11 connector C. The ignition-operated supply comes from under-facia junction unit B002 - pin 1 connector A -, protected by fuse F31, located in the control unit. When relay T08 is excited, power goes to wiper motor N015 - pin 3 - and stalk unit H005 - pin 2 connector -. Power reaches the stalk unit from underfacia junction unit B002, protected by fuse F43, housed in the control unit.According to the function selected, stalk unit H005 - connector A - sends the following control signals to the electronic device inside wiper motor N015:
