Wiring Diagram - TACHOGRAPH - Fiat DUCATO 2.8 JTD 8V fino a 02/05
Components - TACHOGRAPH - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| B101 | OPTIONAL JUNCTION UNIT UNDER THE DASHBOARD | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| D160 | DASHBOARD/OPTIONAL DASHBOARD COUPLING | - |
| D176 | OPTIONAL DASHBOARD/TACHOGRAPH COUPLING | - |
| D177 | DASHBOARD/TACHOGRAPH COUPLING | - |
| E005 | TACHOGRAPH | |
| E050 | INSTRUMENT PANEL | |
| H090 | SWITCH CONTROL PANEL | |
| K152 | TACHOGRAPH SENSOR | - |
| - |
Location Components - TACHOGRAPH - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| B099 | MAXI FUSE BOX ON BATTERY | - |
| B101 | OPTIONAL JUNCTION UNIT UNDER THE DASHBOARD | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| D160 | DASHBOARD/OPTIONAL DASHBOARD COUPLING | - |
| D176 | OPTIONAL DASHBOARD/TACHOGRAPH COUPLING | - |
| D177 | DASHBOARD/TACHOGRAPH COUPLING | - |
| E005 | TACHOGRAPH | |
| E050 | INSTRUMENT PANEL | |
| H090 | SWITCH CONTROL PANEL | |
| K152 | TACHOGRAPH SENSOR | - |
| - |
Description - TACHOGRAPH - Fiat DUCATO 2.8 JTD 8V fino a 02/05
The tachograph is a device that records vehicle speed, the route followed and the following four hour groups:
Operational Description - TACHOGRAPH - Fiat DUCATO 2.8 JTD 8V fino a 02/05
Tachograph E005 receives power directly from the battery, al pin 1 of connector B - from a line protected by fuse F34, located in optional underfacia junction unit B101. The tachograph receives ignition-operated information at pin 3 of the same connector via fuse F27, which is also located in the optional junction unit. The side light activation signal is supplied to pin 2 from the control panel H090. Pins 5 and 6 are connected to earth C020.Tachograph E05 supplies power and earth to tachographic sensor K152 via pins 1 and 2 of connector A. The tachograph receives signals from sensor K152 from pins 3 and 4. Tachograph E005 sends a coded signal from pin 7 to instrument panel E050 - pin 14 connector A -.
