WIRING DIAGRAM - DOOR MIRROR ADJUSTMENT - Fiat GRANDE PUNTO 1.4 8v
COMPONENTS - DOOR MIRROR ADJUSTMENT - Fiat GRANDE PUNTO 1.4 8v
| Component code | Description | Reference to the operation |
| B001 | JUNCTION UNIT | |
| B099 | MAXI FUSE BOX ON BATTERY | |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D030 | DRIVER'S FRONT DOOR COUPLING | - |
| D031 | PASSENGER FRONT DOOR COUPLING | - |
| H001 | IGNITION SWITCH | |
| H030 | ADJUSTABLE MIRRORS CONTROL | |
| M001 | BODY COMPUTER | |
| P060 | DRIVER'S DOOR MIRROR | |
| P061 | RIGHT EXTERNAL REAR VIEW MIRROR |
COMPONENT LOCATION - DOOR MIRROR ADJUSTMENT - Fiat GRANDE PUNTO 1.4 8v
| Component code | Description | Reference to the operation |
| B001 | JUNCTION UNIT | |
| B099 | MAXI FUSE BOX ON BATTERY | |
| C015 | DASHBOARD EARTH, DRIVER'S SIDE | - |
| D030 | DRIVER'S FRONT DOOR COUPLING | - |
| D031 | PASSENGER FRONT DOOR COUPLING | - |
| H001 | IGNITION SWITCH | |
| H030 | ADJUSTABLE MIRRORS CONTROL | |
| M001 | BODY COMPUTER | |
| P060 | DRIVER'S DOOR MIRROR | |
| P061 | RIGHT EXTERNAL REAR VIEW MIRROR |
DESCRIPTION - DOOR MIRROR ADJUSTMENT - Fiat GRANDE PUNTO 1.4 8v
The door mirrors can be electrically adjusted in two directions using a joystick control located in the door controls on the driver''s side: a selection cursor makes it possible to choose either the left or the right mirror. The button controls two electrical motors located in each of the two mirrors: one motor allows the rotation of the mirror on the horizontal axis, another on the vertical axis.The circuit is supplied by an ignition-operated relay and protected by a fuse in the engine compartment control unit.
FUNCTIONAL DESCRIPTION - DOOR MIRROR ADJUSTMENT - Fiat GRANDE PUNTO 1.4 8v
The controls on the driver''s door H30 include the joystick and control switch for the exterior rear view mirrors:Control H30 is supplied - at pin 4 - from a line protected by fuse F24 and relay T5 of B1: this supply, ignition-operated except during start-up (INT/A), is controlled by pin 13 of connector A of M1; pin 5 of H30 is earthed.Control H30 supplies the motors of mirrors P60 and P61 directly:- the shared motor supply signal leaves pins 10 and 11 of H30;- the vertical movement signal leaves pins 2 and 3 of H30;- the horizontal movement signal leaves pins 8 and 9 of H30;
