DescriptionThe left and right direction indicators are operated by raising or lowering the appropriate lever on the stalk unit.The hazard warning lights (right and left direction indicators operated simultaneously) are turned on by the pressing the red button at the centre of the dashboard.The turn signals are activated with the ignition key on; For safety reasons, the hazard warning lights are supplied directly from the battery.Two warning lights on the dashboard, also flashing, indicate when the left and right direction indicators are turned on - they come on simultaneously if the hazard warning lights are switched on.The body computer nodeturns on individual turn signals located in the front light clusters, in th e tail-lights and in the side turn signals;monitors correct operation of the system and indicates any faults by turning on the lighting failure warning ilght on the instrument panel.
Functional description The turn signal activation command is issued by stalk unit H005, by turning lever group A to position 1 (left turn signal) or position 2 (right turn signal). Body computer node M001:receives a negative signal (relating to earth C020 connector B) at pin 8 connector P (left side) or pin 9 (right side) connector P.767Earth C020 is secured to the floor and positioned near the right front wheel arch (footwell area). Once it receives the signal, it turns on the side lights:from pin 10 and 11 connector C, supplies the turn signals housed in front light clusters F010 and F011;from pins 15 and 18 connector F, supplies the turn signals housed in tail-lights F030 and F031;from pins 16 and 17 connector F, supplies the turn signals housed in side indicators F020 and F021. Tail-lights F030 and F031 and left side turn signal F020 refer to earth C030 secured to the left rear wheel arch (passenger compartment interior). The hazard warning lights are turned on by a key located in control panel H090.Body computer node M001:receives a negative signal ( in relation to earth C020 connector B) at pin 4 connector P.from pins 11and 11connector C, it supplies the turn signals housed in front light clusters F010 and F011;from pins 15 and 18 connector F , it supplies the turn signals housed in tail-lights F030 and F031;from pins 16 and 17 connector F, it supplies the turn signals housed in side indicators F020 and F020.from pin 3 connector P, it manages the intermittent function of the led for visual warning light indication built into control panel H090.The body computer node monitors correct operation of the light system and indicates faults by turning on the light failure warning light located on instrument panel E050 under the following conditions:circuit open;short circuit to earth;short circuit to +battery. From pins 35, 36 connector I, the body computer comunicates via the CAN network wiht instrument panel E050 (for more details see SeeE1050 CAN CONNECTION LINES ) and controls the relevant warning lights.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.2753183-7040A23frame of instrument panel on facia - r r1. Undo the retaining bolts.Partially remove the instrument panel.2. Disconnect the electrical connection.3. Remove the instrument panel.2046983
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the negative battery terminal.Op. 7055A65 FRONT LIGHT CLUSTER MOULDING.FRAME (ONE) LH OR RH R R1690022371. Undo the retaining bolts.2. Disconnect the electrical connection.3. Remove the fog light.169002740
5540B19
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the negative battery terminal.1. Working inside the engine compartment, remove the access cover to the bulbs.169002742
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.1. Release the retaining clip on the bulb protective/access cover.2. Remove the bulb protective/access cover.2046964
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.1. Release the retaining clip on the bulb protective/access cover.2. Remove the bulb protective/access cover.2046968
5540B84
1. Using a power saw (1a), cut the edges (1b) of the damaged left side bracket.169000726
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Place the car on a lift.Disconnect the battery negative terminal.2752825-4450B02left front wheel r r2753309-7055B90Left front WHEEL ARCH LINER - R.R.1. Working from the wheelarch, release the retaining clip and removethe side repeater.767Take care not to damage the paintedparts of the car.2. Disconnect the electrical connection.3. Remove the side repeater.767The operation described refersto the removal of the left side repeater; to remove the right side repeater,proceed in the same way.2046976
5550C30
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the negative battery terminal.1. Undo the retaining bolts.2. Remove the surround.169002775
5550C54
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Place the car on a lift.Disconnect the battery negative terminal.2752825-4450B02left front wheel r r2753309-7055B90Left front WHEEL ARCH LINER - R.R.1. Working from the wheelarch, release the retaining clip and removethe side repeater.767Take care not to damage the paintedparts of the car.2. Rotate and remove the bulb holder.3. Remove the side repeater.2046977
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Using a suitable tool, remove the number plate light lens.2. Remove the number plate light bulb.2046962
767It is not possible toorder a single lock barrel or to order barrels using only the partcode. When ordering barrels, observe the special procedure set outin operation 5580 - Special Accessories. 768769
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Undo the retaining bolts.2. Remove the instrument panel surround.2047155
7040A26
768769
7040A28
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Release the gear lever boot.2. Undo the upper fixing bolts.3. Remove the upper trim releasing it from the fastening clips.2047158
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Undo the retaining bolts.2. Release the fuse access cover downwards and remove it.2047162
7040A56
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.Release the switch holder trim using asuitable tool.1. Disconnect the electrical connection.2. Remove the switch holder trim.2047163
7040A72
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting212753191-7040A78radio compartment boxr r1. Undo the retaining bolts.2. Remove the oddments compartment.2047164
7040A78
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Work on the fastening tabs (1a) and partly extract the radioconsole.2. Release the radio preparation electrical connections.Remove the radio console.2047165
7040A97
768769
7040A98
1. Disconnect electrical connections (1a) and (1b).2. Release the heater wiring and remove it.2047183
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disengage the fixing lugs (1a) and remove the cover (1b).2046919
5505A32
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.2753188-7040A37fuse box cover - r r1. Undo the retaining bolts.Disconnect the electrical connections.2. Remove the body computer.2046922
