DescriptionThe vehicle is also available, on request, with preparation for the installation of a mobile phone. This system includes:connection for a mobile telephonehands-free function through the radio speakersoutside aerialThe connection for the telephone comprises all the supplies and signals necessary for the operation of the telephone.The aerial is mounted on the rear of the roof: it is a dual function aerial with two cables: one is the actual radio aerial, and one is the telephone cable, with dual reception band (GSM-ETACS at 900 Hz and D.C.S. at 1800 Hz). The radio receives as input the audio signals from the telephone connection. The operation of the telephone, temporarily switches off the radio (MUTE function).The telephone connection has a direct battery supply protected by two fuses, one in the junction unit under the dashboard and one in the body computer node.
Functional description The radio receiver node M094From connector A:pin 4: receives the direct battery supply, from the line protected by fuses F39 and F01; the supply is also provided to the junction D075;pin 7: receives the ignition-dependent supply from the line protected by the fuse F35;pin 8: connection to earth C020 connector B;pin 6: receives the side lights 'on' signal, for managing the instrument illumination; the same signal is also supplied to junction D075;pin 5: connection to the aerial P025;pins 1, 3: connection to the CAN networkSee E1050 CAN CONNECTION LINES .767The earth C020 is secured to the floor, and is positioned near the front right wheelarch (foot area). The junction D020 is housed, in the interior compartment, at the bottom of the front right pillar, near the door cable pass, passenger side.From connector D:pins 7, 8: receives the IN+ and IN- signals coming from the junction D075;pin 12, supplies the earth reference to the junction D075;pin 9: receives the MUTE signal, for temporarily switching off the radio function.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Remove the cable pass on the right side of the vehicle from itsseating and open the cover.2. Remove the adhesive tape (2a) present on the wiring (2b) andrelease the windscreen/rear window washer tubes (2c).Release the wiring from the cable pass.Following the same procedure, release thewiring from the cable pass on the left of the vehicle.2046933
5505C34
768769
5505C35
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect the aerial coaxial cable connections.2. Disconnect the electrical connections (2a), (2b), (2c), (2d),(2e) and (2f).2046939
767It is not possible toorder a single lock barrel or to order barrels using only the partcode. When ordering barrels, observe the special procedure set outin operation 5580 - Special Accessories. 768769
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disengage the fixing lugs (1a) and remove the cover (1b).2046919
5505A32
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.2753188-7040A37fuse box cover - r r1. Undo the retaining bolts.Disconnect the electrical connections.2. Remove the body computer.2046922
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.1. Use the extractors (1a) that can be ordered quoting part number46515517 and extract the radio receiver node (1b) from its seat.2064847
5570T91
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.1. Disconnect the electrical connection.2. Release the wiring from the retaining clip.3. Undo the retaining bolts.4. Remove the speaker.2046988
5570T93
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the battery negativeterminal.1. Disconnect the electrical connection.Release the wiring from the retaining clip.2. Undo the retaining bolts.3. Remove the speaker.2046989
