Wiring diagram - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
Components - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
Component code | Description | Reference to the assembly |
B1 | Engine compartment junction unit | |
B99 | Maxifuse box on battery | |
H44 | Electric window controls on driver''s front door | |
H50 | Window switch on the front door Passenger side | |
K23 | Anti-pinch sensor on the front door | |
M67 | Passenger side door control unit | |
N61 | Passenger side front electric window motor | |
P93 | Aerial for alarm and central locking receiver | - |
Component location - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
Components - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
Component code | Description | Reference to the assembly |
B1 | Engine compartment junction unit | |
B99 | Maxifuse box on battery | |
H44 | Electric window controls on driver''s front door | |
H50 | Window switch on the front door Passenger side | |
K23 | Anti-pinch sensor on the front door | |
M67 | Passenger side door control unit | |
N61 | Passenger side front electric window motor | |
P93 | Aerial for alarm and central locking receiver | - |
Description - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
The door control units control the operation of the driver and passenger side front electric window motors.The driver and passenger side motors are controlled in both manual and automatic mode, acccording to the specification.
Operational description - ELECTRIC FRONT WINDOWS - Fiat STILO 1.2 16v da 07/03 a 12/03
Service relay T13, located in the underfacia control unit B2 , supplies as described above under the control of the Body Computer M1 - pin 14 of connector F - the driver side door control unit M66 and the passenger side control unit M67 - pin 8 of connector D , via two lines, protected by fuses F47 and F48.Control units M66 and M67 , are connected via a CAN line to one another and to the Body Computer M1 .Unit H44 contains the driver and passenger side window controls:: dedicated analogue signals are sent to pins 31 and 32 of connector A of M66 (pin 33 supplies a reference earth)..Control unit M66 directly controls motor N60 (drive side) and - via control unit M67 - motor N61 (passenger side).Similarly, the passenger side front door control H50 sends an analogue signal to control unit M67 pin 32 (pin 33 supplies a reference earth), which drives motor N61 .Pins 2 and 5 of connector C of M66 and M67 also receive signals from the anti-pinch sensors K22 and K23 .The RF aerial-receiver P93 sends the Body Computer M1 the opening/closing signal for the doors and for the windows and the sun roof as well, connecting to pins 21 and 31 of connector B..