DescriptionIn the version with integrated CONNECT radio-telephone-navigator, the telephone (GSM module and SIM-CARD reader) is integrated in the unit.This system includes:GSM module and SIM-CARD reader integrated in the radio-telephone-navigator;hands-free function via the radio speakers;microphone located in the front courtesy light;outside aerial.An additional outside telephone receiver can be fitted, on request, which switches automatically to the hands free system.The integrated radio-telephone-navigator is a node of the CAN network through which it exchanges information with the Body Computer and other electronic units.The commands of the telephone function are grouped together on a conventional telephone keyboard (12 buttons), with in addition dedicated keys for emergency call.The commands are displayed on the integrated radio-telephone-navigator display.Some versions have a set of buttons located on the steering wheel: these, in addition to the radio controls, allow commands to be sent for the telephone function.There is also the 'voice recognition' function: this is an internal voice recognition module which acquires the commands received from the microphone and interprets them, sending them to the telephone unit proper.The fishpole antenna is mounted at the rear of the roof: this is a two-function aerial with two cables: one is the actual radio aerial, and one is the telephone cable with dual reception band (GSM-ETACS at 900 Hz and D.C.S. at 1800 Hz). If the navigator is also installed 3360938SeeE4091CONNECT , the aerial has three functions (radio/GSM/GPS). An additional outside telephone receiver can be fitted, on request, which switches automatically to the hands free system. For more details on the operation of the telephone see DESCRIPTION AND OPERATION: 5570 ACCESSORIES
Functional description The integrated radio-telephone-navigator P20 is supplied directly (7 of connector A) by the battery via the line of fuse F39 of the unit under the dashboard B2 . Pin 4 of connector A receives a supply from the INT line protected by fuse 49 of control unit Pins 1 and 3 of connector A receive the CAN line with which the display P20 is connected to the Body Computer M1 and the other nodes of the system. Pin 8 of connector A is earthed. The GSM aerial P25 is connected to the telephone function via an appropriate coaxial cable different from that used for the radio and that used for the navigation function (GPS). Connector B of P20 is the source of the cables carrying signals to the loudspeakers used for the hands-free function 3360913SeeE3510RADIO . Pins 9 and 18 of connector D of P20 are connected to the microphone P26 ; pin 12 of connector D is earthed. The integrated radio-telephone-navigator P20 is not connected to the radio controls on the steering wheel: the connection is via the clock spring D47 , which is a node of the CAN network. 3360666SeeE1050CAN CONNECTION LINES The external telephone receiver P27 is connected to connector F of P20 at pins 6, 7, 8, 16 and 17 and is supplied via the line for fuse F39 of the junction unit the dashboard B2 .
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the negative battery terminal.1. Remove the junction unit protective cover.192009560
5505A35
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363361-7040A44facia lh side cover - r r1. Disconnect the front electrical connectors of the junction unitcomplete with body computer.2. Unscrew the retaining bolts.3. Remove from its seating the junction unit complete with bodycomputer.4. Disconnect the rear electrical connectors of the junction unitcomplete with body computer.2027438
5505A36
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Separate the junction unit (1a) from the body computer (1b),by releasing the retaining lugs (1c).2027440
5505A41
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363151-5580C18air bag module - r+r . 769- 4110A16 steering wheel - r r for replacement or checks forversions with airbag and manual gearbox with hydraulic selection . 1. Disconnect the electrical connectors (1a) and remove the controlunit (1b) from its seating.2027441
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect the electrical connectors (1a) and (1b).2. Undo the fixing bolts (2a) and remove the door node (2b).2027444
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.1. Release the clips and remove the protective cover for the uniton the battery.2. Undo the bolts (2a) and remove the battery fixing bracket (2b).3. Slacken the nut and disconnect the battery's negative terminal.2027495
5530B52
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.3363098Op. 5530B10 BATTERY - R+R3363096- Disconnect the engine management unit electrical connections.Release the wiring from the retaining bands.1. Undo the rear fixing bolt (1a), release the front fastenings (1b) and place the engine compartment junction unit (1c) at the side.192008351
5530B56
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Undo the fixing bolts (1a) and remove the battery cover (1b).2027502
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Position the steering wheelso that the wheels are as parallel as possible to the longitudinalaxis of the car.3363098-5530B56BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.7683363151-5580C18air bag module - r+r768- 4110A16 steering wheel - r r for replacement or checks forversions with airbag and manual gearbox with hydraulic selection 7683363357-7040A26steering column trim - r+r1. Undo the bolt securing the clock spring to the stalk unit.2. Disconnect the clock spring junction electrical connector.3. Remove the clock spring.2027556
5580C18
768769
5580C22
768769
5580C26
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.1. Use an appropriate tool to prise up the switch from its seatand remove.2027559
767Before carrying out thefollowing operations, it is essential to carry out the followingpreliminary operations: (1) set the ignition key to STOP; (2) disconnectand isolate the battery cables; (3) wait 10 minutes before proceeding.768
5580C52
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Undo the fixing bolts (1a) and remove the grab handle mount (1b).Carry out the same operations for the remaininggrab handle mounts.2027567
767 It is not possible toorder a single lock barrel or to order barrels using a single partcode. When ordering barrels, observe the special procedure illustrated 3363161See assembly5580E anti-theft device .
5520A18
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363357-7040A26steering column trim - r+r1. Disconnect the electrical connectors of the ignition block (1a)and Cruise Control (1b).2. Release the retaining clips on the ignition switch contact block.2027470
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363151-5580C18air bag module - r+r . 769- 4110A16 steering wheel - r r for replacement or checks forversions with airbag and manual gearbox with hydraulic selection . 1. Undo the bolt fixing the Air Bag.Prise up the horn contact using the appropriatetool.2027549
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.1. Use extractors (1a) to remove radio (1b) from its seat.2027551
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.Move the rear seat to the end of its travel.Remove the rear parcel shelf.1. Remove the protective cover.2027554
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Čeština
Dansk
Deutsch
Ελληνικά
English
English
Español
Suomi
Français
Français
Hrvatski
Magyar
Italiano
日本語
한국어
Nederlands
Polski
Português
Português
Română
Русский
Slovenčina
Slovenščina
Svenska
Türkçe
中文 (中国)
