Wiring diagram - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
Components - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
Component code | Description | Reference to the assembly |
A30 | Ignition coil | |
B2 | Junction unit under dashboard | |
C10 | Left front earth | - |
C15 | Driver''s dashboard earth | - |
C20 | Passenger dashboard earth | - |
C40 | Earth on engine | - |
C60 | Injection control unit earth | - |
D1 | Front/dashboard coupling | - |
D1 | Front/dashboard coupling | - |
D4 | Front/engine coupling | - |
D4 | Front/engine coupling | - |
D24 | Engine/i.e. coupling | - |
D24 | Engine/i.e. coupling | - |
D81 | Injector coupling | - |
D81 | Injector coupling | - |
D97 | Short circuit coupling | - |
E50 | Instrument panel | |
I30 | Brake pedal switch | - |
I31 | Clutch pedal switch | - |
I34 | Starting enablement switch on brake pedal | - |
I50 | Inertia switch | |
K16 | Lambda sensor on pre-catalyzer -2 | - |
K17 | Lambda sensor downstream of the post-converter | |
K36 | Engine temperature sending unit | |
K43 | Integrated air temperature sensor | |
K47 | Timing sensor | |
L10 | Fuel vapour recovery solenoid valve | |
M1 | Body computer | |
N40 | Fuel level gauge | - |
N70 | Injector | |
N76 | Variable valve timing actuator |
Component location - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
Components - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
Component code | Description | Reference to the assembly |
A30 | Ignition coil | |
B2 | Junction unit under dashboard | |
C10 | Left front earth | - |
C15 | Driver''s dashboard earth | - |
C20 | Passenger dashboard earth | - |
C40 | Earth on engine | - |
C60 | Injection control unit earth | - |
D1 | Front/dashboard coupling | - |
D1 | Front/dashboard coupling | - |
D4 | Front/engine coupling | - |
D4 | Front/engine coupling | - |
D24 | Engine/i.e. coupling | - |
D24 | Engine/i.e. coupling | - |
D81 | Injector coupling | - |
D81 | Injector coupling | - |
D97 | Short circuit coupling | - |
E50 | Instrument panel | |
I30 | Brake pedal switch | - |
I31 | Clutch pedal switch | - |
I34 | Starting enablement switch on brake pedal | - |
I50 | Inertia switch | |
K16 | Lambda sensor on pre-catalyzer -2 | - |
K17 | Lambda sensor downstream of the post-converter | |
K36 | Engine temperature sending unit | |
K43 | Integrated air temperature sensor | |
K47 | Timing sensor | |
L10 | Fuel vapour recovery solenoid valve | |
M1 | Body computer | |
N40 | Fuel level gauge | - |
N70 | Injector | |
N76 | Variable valve timing actuator |
Description - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
An electronic control system supervises and governs all engine parameters to optimise performance and fuel consumption by means of a real-time response to different service conditions.The system is managed by a single control unit which controls both ignition and injection.
Operational description - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat STILO 2.4 20v da 01/04
The engine management control unit M10 controls and governs the entire electronic ignition and injection system.The control unit M10 is supplied directly by the battery at pin 15 of connector A via a line protected by fuse F18 of the engine compartment junction unit B1The ignition-operated power supply (15/54) arrives via a line protected by fuse F16 of the engine compartment junction unit B1 at pin 47 of connector A of M10 .