Components - CIGAR LIGHTER / CURRENT SOCKET - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Component code | Description | Reference to the assembly |
B001 | ENGINE COMPARTMENT JUNCTION UNIT | |
B005 | MAXI FUSE BOX | - |
B098 | ADDITIONAL FUSE BOX | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C031 | RIGHT REAR EARTH | - |
D020 | DASHBOARD/REAR COUPLING | - |
H001 | Ignition switch | - |
M001 | BODY COMPUTER | |
P050 | CIGAR LIGHTER / CURRENT SOCKET | - |
P051 | Current socket in dashboard | - |
- | ||
P052 | REAR CURRENT SOCKET | - |
Component code | Description | Reference to the assembly |
B001 | ENGINE COMPARTMENT JUNCTION UNIT | |
B005 | MAXI FUSE BOX | - |
B098 | ADDITIONAL FUSE BOX | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C031 | RIGHT REAR EARTH | - |
D020 | DASHBOARD/REAR COUPLING | - |
H001 | Ignition switch | - |
M001 | BODY COMPUTER | |
P050 | CIGAR LIGHTER / CURRENT SOCKET | - |
P051 | Current socket in dashboard | - |
- | ||
P052 | REAR CURRENT SOCKET | - |
A standard type current socket is housed in the centre of the dashboard: the socket contains a cigar lighter resistance that can also be used to connect other instruments or devices because it works it is a 12V power point. Press the cigar lighter knob to operate the lighter: after a few seconds it will emerge automatically, ready for use.768 The cigar lighter gets extremely hot. Handle it carefully and keep it out of reach of children: risk or fire or burns. Always check that the cigar lighter is switched off. The socket is lit up when the side lights are on.The socket is equipped with a thermal protection device: this protection cuts off the power supply if devices that absorb a lot of energy are connected.Two further power points are present, with protective covers. Their specifications are similar to those described for the cigar lighter: one located next to the driver''s seat and one at the rear next to the third row of seats.The circuit for each current socket is protected by a specific fuse: the one for the front socket is located in the Body computer node, the other for the two rear sockets is located in the additional fuse box.The circuit for each current socket is protected by a specific fuse: the one for the front socket is located in the Body computer node, the other for the two rear sockets is located in the additional fuse box.
The current socket P050 receives a power supply (pin 2) from the Body computer node M001 (pin 1 connector F).The light for the socket P050 (pin 1) is also supplied by the Body computer node M001 (pin 7 connector D).The current socket P050 is earthed at pin 3.Sockets P051 and P052 (pin 2) receive a supply from the lines protected by fuses F40 and F39, respectively, located in the additional fuse box B098 (pins G40 and G39 connector B respectively).The sockets P051 and P052 are earthed at pin 3.Sockets P051 and P052 are not lit up.