Components - RADIO - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Component code | Description | Reference to the assembly |
B001 | ENGINE COMPARTMENT JUNCTION UNIT | |
C015 | DRIVER''S DASHBOARD EARTH | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C022 | Centre dashboard earth | - |
D006 | FRONT/REAR COUPLING | - |
D020 | DASHBOARD/REAR COUPLING | - |
D030 | DRIVER''S FRONT DOOR COUPLING | - |
D031 | PASSENGER FRONT DOOR COUPLING | - |
E050 | INSTRUMENT PANEL | |
H001 | Ignition switch | |
M001 | BODY COMPUTER | |
M093 | STEERING WHEEL NODE CONTROL UNIT (NVO) | |
M140 | WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO) | - |
M172 | MULTIFUNCTION SCREEN NODE | - |
P020 | RADIO | - |
P025 | AERIAL FEED/AMPLIFIER | - |
P035 | SPEAKER IN LEFT FRONT DOOR | |
P036 | SPEAKER IN RIGHT FRONT DOOR | |
P045 | LEFT FRONT TWEETER SPEAKER | |
P046 | RIGHT FRONT TWEETER SPEAKER | |
P047 | LEFT REAR TWEETER SPEAKER | |
P048 | RIGHT REAR TWEETER SPEAKER | |
P075 | CD CHANGER MODULE | - |
P120 | LEAF REAR SPEAKER IN SIDE PANEL | - |
P121 | RIGHT REAR SPEAKER IN SIDE PANEL | - |
Component code | Description | Reference to the assembly |
B001 | ENGINE COMPARTMENT JUNCTION UNIT | |
C015 | DRIVER''S DASHBOARD EARTH | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C022 | Centre dashboard earth | - |
D006 | FRONT/REAR COUPLING | - |
D020 | DASHBOARD/REAR COUPLING | - |
D030 | DRIVER''S FRONT DOOR COUPLING | - |
D031 | PASSENGER FRONT DOOR COUPLING | - |
E050 | INSTRUMENT PANEL | |
H001 | Ignition switch | |
M001 | BODY COMPUTER | |
M093 | STEERING WHEEL NODE CONTROL UNIT (NVO) | |
M140 | WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO) | - |
M172 | MULTIFUNCTION SCREEN NODE | - |
P020 | RADIO | - |
P025 | AERIAL FEED/AMPLIFIER | - |
P035 | SPEAKER IN LEFT FRONT DOOR | |
P036 | SPEAKER IN RIGHT FRONT DOOR | |
P045 | LEFT FRONT TWEETER SPEAKER | |
P046 | RIGHT FRONT TWEETER SPEAKER | |
P047 | LEFT REAR TWEETER SPEAKER | |
P048 | RIGHT REAR TWEETER SPEAKER | |
P075 | CD CHANGER MODULE | - |
P120 | LEAF REAR SPEAKER IN SIDE PANEL | - |
P121 | RIGHT REAR SPEAKER IN SIDE PANEL | - |
The vehicle is wired for the installation of a radio system.This preparation includes:- radio supply leads;- front power speakers and separate tweeters;- rear power speakers and separate tweeters;- cables connecting the radio with the speakers;- an aerial at the back mounted on the roof and connected by means of a coaxial cable to the radio.The radio circuit is supplied both with the key in position M and it receives a direct supply from the battery (which allows tuning, safety codes, etc. to be programmed).The main radio controls are duplicated on the steering wheel allowing the driver to operate the radio without taking their hands off the steering wheel.To all intents the radio is a CAN node and is connected to the body computer, the instrument panel and the multifuction screen where information relating to the radio is displayed.A special CD cartridge allows up to 6 CDs to be loaded which are then selected through the radio controls. The CD changer is located in the dashboard console.The following is also available, depending on the trim level:- RADIO with CD player, described in this section;- CONNECT Nav" device (with navigator with pictograms);- CONNECT Nav +" device (with navigator with maps).All the details on the specifications and the operation of the various models are contained in the "OWNER''S HANDBOOK".
Multifunction screen node M172 (pin 1) receives a power supply from body computer node M001 (pin 1 connector D).Instrument panel control unit E050 (pin 13) and odometer warning light control unit M140 (pin 4) receives a power supply from M001 (pin 6 connector D) but with a line protected from fuse F14.Radio P020:- is interfaced (pins 10 and 13 connector A), via the CAN line, with warning light and odometer control unit node M140 (pins 2 and 5), control panel E050 (pins 6 and 12), body computer node M001 (pins 8 and D) and multifunction screen node M172 (pins 7 and 9);- it is connected (pins 7, 2, 1, 3, 8, 10, 4 connector C) to CD loader P075 (pins 1, 7, 3, 9, 10, 6, 5 respectively);- it receives power supply (pin 12 connector A) from body computer node M001 (pin 1 connector D).The Connect radio P020 is connected, via connector B, to the various speakers located inside the vehicle:- from pins 1, 5 it is connected to the speakers P048 (right rear tweeter) and P121 (right rear speaker);- it is connected, from pins 2, 6, to the speakers P036 (speaker in right front door) and P046 (right front tweeter);- it is connected, from pins 3, 7, to the speakers P035 (speaker in left front door) and P045 (left front tweeter);- from pins 4, 8 it is connected to the speakers P047 (left rear tweeter) and P120 (left rear speaker on side panel);The steering wheel node control unit m093 receives a power supply (pin 5 connector A and pin 4 connector D) from the Body computer node M001 (pin 11 connector B and pin 1 connector G respectively) via two lines only the second of which is protected by fuse F04.Some radio functions may be controlled by radio controls on the steering wheel: from the steering wheel node control unit M093 (pins 1 and 3 of connector A), it is forwarded to the Body computer node M001 (pins 5 and 3 of connector G respectively). The signal travels via the CAN line.