ANTI-THEFT – Mitsubishi Lancer GT 2012 – SYSTEM WIRING DIAGRAMS

ANTI-THEFT

Forced Entry Wiring Diagram, Evolution (1 of 2) for Mitsubishi Lancer GT 2012

List of elements for Forced Entry Wiring Diagram, Evolution (1 of 2) for Mitsubishi Lancer GT 2012:

• (behind center of dash) g6
• C-301
• C-304
• C-312
• C-313
• C-316
• C-317
• C-41
• Can drive circuit
• Center panel unit
• Circuit interface
• Circuit lin drive
• Computer data lines system
• D-16
• Door locks system
• Ector 1
• Etacs-ecu (on rear of junction block, behind left end of dash)
• F-27
• Fuse 15a
• Fuse 7.5a
• G11 (left side of luggage compt)
• G4 (behind right kick panel)
• Headlights system
• Hot at all times
• Hot w/ ig1 relay energized
• Immobilizer antenna
• Joint conn-
• Joint connector (can 1) (left top of dash)
• Kos-ecu (w/ keyless entry) (left side of dash)
• Pnk
• Receiver
• Receiver antenna assembly
• Red
• Theft-alarm indicator
• Trunk lid latch
• W/ keyless entry
• W/o keyless entry
• Wireless control module (w/o keyless entry) (on ignition switch)

Forced Entry Wiring Diagram, Evolution (2 of 2) for Mitsubishi Lancer GT 2012

List of elements for Forced Entry Wiring Diagram, Evolution (2 of 2) for Mitsubishi Lancer GT 2012:

• (right rear of engine compt) (w/o theft- alarm sensor) theft alarm horn
• A-04
• A-60
• C-130
• C-133
• Can transceiver circuit
• Combination meter
• Cpu
• D-45
• Engine compartment relay box
• Exterior lights & headlights systems
• Fuse 4 10a
• Fuse 9 20a
• G19 (left side of engine compt)
• G5 (right of accelerator pedal)
• Headlights system
• Hood switch
• Horn relay
• Horns system
• Hot at all times
• Lcd (theft alarm indicator)
• Left front door switch (in left "b" pillar)
• Left rear door switch (in left "c" pillar)
• Lin cut off control unit (w/ theft alarm sensor) (left end of dash)
• Nca
• Pnk
• Red
• Right front door switch (in right "b" pillar)
• Right rear door switch (in right "c" pillar)
• Sensor) (front center of roof)
• Theft alarm horn relay (w/o theft- alarm sensor) (on underhood fuse/relay block)
• Theft- alarm sensor (w/ theft alarm
• Theft- alarm siren (w/ theft- alarm sensor) (right rear of engine compt)
• Tone alarm

Forced Entry Wiring Diagram, Except Evolution (1 of 2) for Mitsubishi Lancer GT 2012

List of elements for Forced Entry Wiring Diagram, Except Evolution (1 of 2) for Mitsubishi Lancer GT 2012:

• (right of accelerator pedal) g5
• C-301
• C-304
• C-312
• C-313
• C-316
• C-317
• Can drive circuit
• D-15
• Etacs-ecu (on rear of junction block, behind left end of dash)
• F-23
• F-30
• Fuse 15a
• Fuse 7.5a
• G10 (at left "c" pillar)
• G21
• G4 (behind right kick panel)
• Hatchback
• Headlights system
• Horns system
• Hot at all times
• Hot w/ ig1 relay energized
• Interface circuit
• Joint connector (can 1) (left side of dash)
• Joint connector 1 (right side of dash)
• Keyless entry receiver
• Kos-ecu (w/ keyless entry) (left side of dash)
• Liftgate switch
• Lin drive circuit
• Nca
• Receiver antenna module (on ignition switch)
• Receiver keyless entry
• Red
• Sedan
• Trunk lid lock actuator (center rear of trunk lid)
• Wireless control module (w/o keyless entry) (on ignition switch)

Forced Entry Wiring Diagram, Except Evolution (2 of 2) for Mitsubishi Lancer GT 2012

List of elements for Forced Entry Wiring Diagram, Except Evolution (2 of 2) for Mitsubishi Lancer GT 2012:

• A-63
• C-127
• C-130
• Can transceiver circuit
• Center panel unit
• Combination meter
• Computer data lines system
• Cpu
• D-47
• Exterior lights & headlights systems
• G1 (at right front corner of engine compt)
• G16 (rear of engine compt)
• G7 (top left side of headliner)
• Hood latch switch (on hood latch)
• Lcd (theft-alarm indicator)
• Left front door switch (in left "b" pillar)
• Left rear door switch (in left "c" pillar)
• Lin cut off control unit (w/theft alarm sensor) (left end of dash)
• Nca
• Pnk
• Red
• Right front door switch (in right "b" pillar)
• Right rear door switch (in right "c" pillar)
• Theft- alarm sensor (if equipped) (front center of roof)
• Theft- alarm siren (w/ theft alarm sensor) (right rear of engine compt)
• Theft-alarm indicator
• Tone alarm

Immobilizer Wiring Diagram, Evolution for Mitsubishi Lancer GT 2012

List of elements for Immobilizer Wiring Diagram, Evolution for Mitsubishi Lancer GT 2012:

• B-10
• C-307
• C-317
• Computer data lines system
• Door locks system
• Engine compartment relay box
• Engine control module (left rear of engine compt)
• Engine controls system
• Etacs-ecu (on rear of junction block, behind left end of dash)
• Fuse 10a
• Fuse 20a
• Fuse 30a
• Fuse 7.5a
• G4 (behind right kick panel)
• Hot at all times
• Hot w/ ig1 relay energized
• Id code (transponder)
• Immobilizer antenna
• Joint connector-c101
• Kos-ecu (w/ keyless entry) (left side of dash)
• Mfi relay
• Pnk
• Receiver antenna module (on ignition switch)
• Red
• Wireless control module (w/o keyless entry) (on ignition switch)

Immobilizer Wiring Diagram, Except Evolution for Mitsubishi Lancer GT 2012

List of elements for Immobilizer Wiring Diagram, Except Evolution for Mitsubishi Lancer GT 2012:

• B-109
• C-307
• C-317
• Computer data lines system
• Engine compartment relay box
• Engine control module (left rear of engine compt)
• Engine controls system
• Etacs-ecu (on rear of junction block, behind left end of dash)
• Fuse 10a
• Fuse 30a
• Fuse 7.5a
• G4 (behind right kick panel)
• Hot at all times
• Hot w/ ig1 relay energized
• Id code (transponder)
• Immobilizer antenna
• Joint connector 1 (right side of dash)
• Kos-ecu (w/ keyless entry) (left side of dash)
• Mfi relay
• Pnk
• Receiver antenna module (on ignition switch)
• Red
• Wireless control module (w/o keyless entry) (on ignition switch)