CRUISE CONTROL – Ford Ranger Splash 1997 – SYSTEM WIRING DIAGRAMS

CRUISE CONTROL

Cruise Control Wiring Diagram for Ford Ranger Splash 1997

List of elements for Cruise Control Wiring Diagram for Ford Ranger Splash 1997:

• (engine sensor harness, 2.3l: near breakout to throttle position sensor; 3.0l: left rear of engine compt; 4.0l: near breakout to fuel injector 6) s111
• 1.4k ohms
• 15a
• 7.5a
• A/t
• Accel
• Anti- theft system
• Brake on/off (boo) switch (on brake pedal support)
• Brake press in
• Brake pressure switch (left side of engine compart- ment)
• C214
• C215
• C219
• C221
• C224
• C409
• Clock- spring assembly (top of steering column)
• Clutch pedal position (cpp) switch (top of clutch pedal support)
• Clutch pedal position (cpp) switch jumper (left of steering column)
• Coast
• Control sw gnd
• Control sw in
• Driver's airbag
• Engine compartment fuse/relay box
• Fuse 10
• Fuse 13
• G104 (top center of left fender apron)
• G108 (left side of upper radiator support)
• Generic electronic module (gem)/ central timer module (ctm) (behind center of i/p)
• Ground
• Horn maxi fuse 11 20a
• Horn nca switches
• Horn relay (in eng compt fuse/ panel)
• Hot at all times
• Hot in run
• I/p fuse panel
• Ign
• Ignition key warning switch
• Ind ctrl
• Instru- ment cluster
• Instrument cluster
• Interior lights system
• M/t
• Main light switch
• Nca
• Off
• Ohms
• Powertrain control module (pcm) (right rear of engine compartment, through safety wall)
• Remote anti- theft person- ality (rap) module (left rear corner of cab)
• Resume
• S110
• S135
• S136
• S139 (dash to head- lamp harn, left side of safety wall)
• S141
• S205
• S229 (main harness, behind top left side of i/p)
• Set/
• Speed control ind
• Speed control servo/ amplifier assembly (right rear of engine compartment)
• Speed control switch assembly
• Speedo
• Steering assembly
• Vehicle speed in
• Vehicle speed sensor (vss) (left rear of trans/ transfer case)
• Vss in