Alfa Romeo 159 1.9 JTD 16V Fino a 12/05 – SUN ROOF – – Powered sunroof – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

WIRING DIAGRAM - SUN ROOF - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

SUN ROOF - WIRING DIAGRAM Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

Získejte přístup ke všem schématům zapojení automobilu

COMPONENTS - SUN ROOF - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

Component code	Description	Reference to the operation
B001	JUNCTION UNIT
B002	JUNCTION UNIT UNDER DASHBOARD
B099	MAXIFUSE BOX ON BATTERY
C020	PASSENGER SIDE DASHBOARD EARTH	-
C030	LEFT REAR EARTH	-
D045	SUN ROOF COUPLING	-
H060	SUN ROOF SWITCH	-
7030B64	SUN ROOF CONTROL SWITCH - R+R

Op.5580E17DISPOSITIVO BLOCCASTERZO - S.R.VedereN035MOTORINO TETTO APRIBILE		-

COMPONENT LOCATION - SUN ROOF - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

DESCRIPTION - SUN ROOF - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

The sun-roof provides a means of extra passenger compartment ventilation and ensures swift air exchange when necessary for improved passenger comfort.The system is operated by a knob near the front courtesy light.The roof operating strategy is controlled by a special control unit that receives signals from the control knob and the roof operating motor.When the control knob is turned in the direction shown by the arrow, the roof slides open: a choice of 5 opening positions is available; return the knob to the central position to close the roof.The sun-roof is equipped with a blind underneath that slides manually but is pushed along by the roof when it opens. The blind emerges slightly when the roof is closed to provide access to the manoeuvring handle.When the control handle is turned the opposite way to the direction shown by the arrow, the roof swivels up at the rear: a choice of 3 opening positions is available; return the knob to the central position to close the roof.Press the knob to interrupt all movement (inhibition position).The electronic roof control circuit also includes an antipinch function: whilst the roof is being closed, themovement is interrupted and reversed by about 10 cm if an obstacle is dtected by a Hall effect sensor located on the motor. This function can be excluded for safety reasons by pressing the knob as described above.The sun roof is also automatically opened through the special prolonged (more than 2 seconds) command sent by the TEG remote control button.The sun roof is also automatically closed - if left open - through the special prolonged (more than 2 seconds) command sent by the TEG remote control button.The circuit is controlled by the services relay and protected by a specific fuse, both located in the junction unit under the dashboard: there is a power supply both with the TEG inserted (ON) and not inserted (OFF) during the starting stage this relay is temporarily deactivated whilst with the TEG not inserted (OFF) the Body Computer keeps the relay activated for 3 minutes but deactivates it 30 seconds after one of the doors is opened.

FUNCTIONAL DESCRIPTION - SUN ROOF - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

The services relay T13, located in the junction unit under the dashboard B2, supplies the sun roof control motor N35 - pin 7 - via the line protected by fuse F46 of B2 through the logic described above and controlled by the Body Computer M1.The roof moving enablement/go ahead signal reaches pin 9 of N35 in accordance with the logic described above coming from pin 10 of connector D of the Body Computer M1.Pin 8 of N35 receives the speedometer signal from pin 28 of connector B of the Body Computer M1.Pin 10 of N35 is earthed, whilst pin 1 of N35 sends a power supply to switch H60 which relays the various control signals corresponding to the various positions of the knob to pins 2, 3, 4 and 5 of N35.