AUDI A4 1996 – Anti-lock brake system with four-wheel drive . Wiring diagrams, Pin Connector, Location

Wiring Diagram AUDI A4 1996 - Anti-lock brake system with four-wheel drive

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS with EDL control unit
J218	Combi-processor in dash panel insert
N55	ABS hydraulic unit
N136	ABS outlet valve, rear left
N166	EDL change-over valve, front right
N167	EDL outlet valve, front right
N168	EDL change-over valve, front left
N169	EDL outlet valve, front left
T10b	10-pin connector, orange, left connector point, A pillar
T16	16-pin connector, centre console, rear (diagnosis connection)
T26	26-pin connector, yellow, on dash panel insert
T26a	26-pin connector, blue, on dash panel insert
44	Earth point, lower part of left A-pillar
A40	Positive (+) connection -1- (30), in dash panel wiring harness
A76	Connection (diagnosis wire K), in dash panel wiring harness
A91	Connection (signal for dash panel insert), in dash panel wiring harness
*	Applicable up 1996 model year
**	Applicable from model year 1997

D	Ignition/starter switch
F	Brake light switch
J104	ABS with EDL control unit
J105	ABS return flow pump relay
J106	Relay for ABS solenoid valves
N55	ABS hydraulic unit
N99	ABS inlet valve, front right
N100	ABS outlet valve, front right
N101	ABS inlet valve, front left
N102	ABS outlet valve, front left
N133	ABS inlet valve, rear right
N134	ABS inlet valve, rear left
N135	ABS outlet valve, rear right
S53	ABS hydraulic pump fuse
T10b	10-pin connector, orange, left connector point, A pillar
V39	ABS return flow pump
22	Earth point, on hydraulic unit
A2	Positive (+) connection (15), in dash panel wiring harness
A18	Connection (54), in dash panel wiring harness
A32	Positive (+) connection (30), in dash panel wiring harness