Dodge Colt 1990 - FUSES & CIRCUIT BREAKERS Fuses & Circuit Breakers 1990-91 Chrysler Motors

Dodge Colt 1990 - IDENTIFICATION FUSE PANEL IDENTIFICATION (1990-91 MODELS)

Fuse panel is located under instrument panel on driver's side of vehicle. Fusible link wires are used to protect a number of circuits. These links will melt in the event of excessive current flow. Replace after determining cause.

Fig. 1: Dodge Colt 1990 - Component Locations - Fuse Panel Identification (1990-91 Models)

Dodge Colt 1990 - FUSE & CIRCUIT BREAKER IDENTIFICATION 1 - 15 Amp

Washer/Wiper.

Dodge Colt 1990 - 2 - 10 Amp

Gauges.

Dodge Colt 1990 - 3 - 10 Amp

Radio.

Dodge Colt 1990 - 4 - 10 Amp

Automatic Transaxle.

Dodge Colt 1990 - 5 - 10 Amp

Turn Signals.

Dodge Colt 1990 - 6 - 10 Amp

Horn.

Dodge Colt 1990 - 7 - 15 Amp

Cigarette Lighter.

Dodge Colt 1990 - 8 - 10 Amp

Dome Light.

Dodge Colt 1990 - 9 - 10 Amp

Heater.

Dodge Colt 1990 - 10 - 20 Amp

Heater.

Dodge Colt 1990 - 11 - 15 Amp

Automatic Seat Belt.

Dodge Colt 1990 - 12 - 10 Amp

Stoplights.

Dodge Colt 1990 - 13 - Amp

Spare Fuses.

Dodge Colt 1990 - CAUTIONS & WARNINGS BATTERY

WARNING:

When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See the COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section.

Dodge Colt 1990 - SUPPLEMENTAL RESTRAINT (AIR BAG SYSTEM) (IF EQUIPPED)

WARNING:

The Diagnostic Energy Reserve Module (DERM) can maintain enough voltage to cause a deployment of the Inflator Module for up to 10 minutes after the Ignition Switch is turned off and the battery is disconnected. Many of the service procedures require disconnection of the Inflator Module to avoid an accidental deployment.