Dodge Colt 1993 - FUSES & CIRCUIT BREAKERS Fuses & Circuit Breakers 1993-95 Chrysler Motors

Dodge Colt 1993 - IDENTIFICATION FUSE PANEL IDENTIFICATION (1993-95 MODELS)

Fuse panel is located under instrument panel on driver's side of vehicle. Fusible link wires are used to protect a number of circuits. These links will melt in the event of excessive current flow. Replace after determining cause.

Fig. 1: Dodge Colt 1993 - Component Locations - Fuse Panel Identification (1993-95 Models)

Dodge Colt 1993 - FUSE & CIRCUIT BREAKER IDENTIFICATION 1 - 10 Amp

Dome Light.

Dodge Colt 1993 - 2 - 10 Amp

Heater Relay.

Dodge Colt 1993 - 3 - 10 Amp

4 A/T.

Dodge Colt 1993 - 4 - 15 Amp

Stoplights.

Dodge Colt 1993 - 5 - 10 Amp

Turn Signals.

Dodge Colt 1993 - 6 - 20 Amp

Door Locks.

Dodge Colt 1993 - 7 - 10 Amp

Horn.

Dodge Colt 1993 - 8 - 20 Amp

Wiper.

Dodge Colt 1993 - 9 - 25 Amp

Heater.

Dodge Colt 1993 - 10 - 10 Amp

Backup Lights.

Dodge Colt 1993 - 11 - 10 Amp

Meters.

Dodge Colt 1993 - 12 - 15 Amp

Cigarette Lighter.

Dodge Colt 1993 - 13 - 10 Amp

Radio.

Dodge Colt 1993 - 14 - Spare Fuse

Not Used.

Dodge Colt 1993 - CAUTIONS & WARNINGS BATTERY

WARNING:

When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See the COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section.

Dodge Colt 1993 - SUPPLEMENTAL RESTRAINT (AIR BAG SYSTEM) (IF EQUIPPED)

WARNING:

The Diagnostic Energy Reserve Module (DERM) can maintain enough voltage to cause a deployment of the Inflator Module for up to 10 minutes after the Ignition Switch is turned off and the battery is disconnected. Many of the service procedures require disconnection of the Inflator Module to avoid an accidental deployment.