Dodge Intrepid 2000 - 1999-00 ELECTRICAL Fuses & Circuit Breakers - Concorde, Intrepid, LHS & 300M

Dodge Intrepid 2000 - IDENTIFICATION JUNCTION BLOCK

CAUTION:

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

NOTE:

Junction block may also be referred to as fuse block.

NOTE:

Power Distribution Center (PDC) also contains fuses. See POWER DISTRIBUTION CENTER .

Dodge Intrepid 2000 - Fuses & Relays

The fuse block is located behind the end cover at the left side of the instrument panel. See Fig. 1 . Pull the cover straight away from the instrument panel for access to the fuses. The location and identification of fuse block fuses and relays can be found on the inside of the instrument panel end cover.

Fig. 1: Dodge Intrepid 2000 - Component Locations - Locating Junction Block

Fig. 2: Dodge Intrepid 2000 - Component Locations - Identifying Junction Fuses & Circuit Breakers

Dodge Intrepid 2000 - POWER DISTRIBUTION CENTER

CAUTION:

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

Dodge Intrepid 2000 - Fuses & Relays

Power Distribution Center (PDC) is located in the engine compartment. See Fig. 3 . This center contains fuses and relays for circuit that operate only under the hood. A label which identifies these components is located on the underside of the cover.

Fig. 3: Dodge Intrepid 2000 - Component Locations - Locating Power Distribution Center

Fig. 4: Dodge Intrepid 2000 - Component Locations - Identifying Power Distribution Center Fuses, Connector & Relay Terminals

Fig. 5: Dodge Intrepid 2000 - Component Locations - Identifying Fuse Ratings & Circuits

Dodge Intrepid 2000 - Relay Terminal Identification

Fig. 6: Dodge Intrepid 2000 - Component Locations - Identifying A/C Compressor Clutch Relay Terminals

Fig. 7: Dodge Intrepid 2000 - Component Locations - Identifying Automatic Shut Down Relay Terminals

Fig. 8: Dodge Intrepid 2000 - Component Locations - Identifying Engine Starter Motor Relay Terminals

Fig. 9: Dodge Intrepid 2000 - Component Locations - Identifying Fuel Pump Relay Terminals

Fig. 10: Dodge Intrepid 2000 - Component Locations - Identifying High Speed Radiator Fan Relay Terminals

Fig. 11: Dodge Intrepid 2000 - Component Locations - Identifying Low Speed Radiator Fan Relay Terminals

Fig. 12: Dodge Intrepid 2000 - Component Locations - Identifying Transmission Control Relay Terminals

Fig. 13: Dodge Intrepid 2000 - Component Locations - Identifying Wiper High/Low Relay Terminals

Fig. 14: Dodge Intrepid 2000 - Component Locations - Identifying Wiper On/Off Relay Terminals