Dodge Intrepid R/T 2000 - 1999-00 ELECTRICAL Fuses & Circuit Breakers - Concorde, Intrepid, LHS & 300M

Dodge Intrepid R/T 2000 - IDENTIFICATION JUNCTION BLOCK

CAUTION:

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

NOTE:

Junction block may also be referred to as fuse block.

NOTE:

Power Distribution Center (PDC) also contains fuses. See POWER DISTRIBUTION CENTER .

Dodge Intrepid R/T 2000 - Fuses & Relays

The fuse block is located behind the end cover at the left side of the instrument panel. See Fig. 1 . Pull the cover straight away from the instrument panel for access to the fuses. The location and identification of fuse block fuses and relays can be found on the inside of the instrument panel end cover.

Fig. 1: Dodge Intrepid R/T 2000 - Component Locations - Locating Junction Block

Dodge Intrepid R/T 2000 - Component Locations - Identifying Junction Fuses & Circuit Breakers

Get access to all wiring diagrams of the car

Fig. 2: Dodge Intrepid R/T 2000 - Component Locations - Identifying Junction Fuses & Circuit Breakers

Dodge Intrepid R/T 2000 - POWER DISTRIBUTION CENTER

CAUTION:

Dodge Intrepid R/T 2000 - Fuses & Relays

Power Distribution Center (PDC) is located in the engine compartment. See Fig. 3 . This center contains fuses and relays for circuit that operate only under the hood. A label which identifies these components is located on the underside of the cover.