WARNING SYSTEMS – Nissan Armada SE 2008 – SYSTEM WIRING DIAGRAMS

WARNING SYSTEMS

Warning Systems Wiring Diagram for Nissan Armada SE 2008

List of elements for Warning Systems Wiring Diagram for Nissan Armada SE 2008:

• Air bag diagnosis sensor unit
• B7 (under left front seat)
• Bat
• Body control module (bcm) (behind center of dash)
• Buckle sw
• Buzzer
• Can-h
• Can-l
• Combi sw input 1
• Combi sw input 2
• Combi sw input 3
• Combi sw input 4
• Combi sw input 5
• Combi sw output 1
• Combi sw output 2
• Combi sw output 3
• Combi sw output 4
• Combi sw output 5
• Combination meter
• Combination switch
• Computer data lines system
• Door ind
• Door sw (dr)
• Fuse & fusible link box (at right rear of engine compt)
• Fuse & relay box (at right rear of engine compt)
• Fuse 10a
• Fuse block (j/b) (behind right end of dash)
• Fusible link 62 10a
• Fusible link f 50a
• Gnd
• Hot at all times
• Hot in on or start
• Ign sw
• Input 1
• Input 2
• Input 3
• Input 4
• Input 5
• Key sw
• Key switch & ignition knob switch
• Key switch & key lock solenoid (on steering column)
• Keyless pwr tuner
• Keyless tuner signal
• Left front door switch (at left "b" pillar)
• Left seat belt buckle pre-tensioner assembly (under driver's seat)
• M18
• M19
• M20
• M23
• M24
• M35
• M39
• M61 (behind center of dash)
• Output 1
• Output 2
• Output 3
• Output 4
• Output 5
• Pnk
• Power
• Remove keyless entry receiver
• Seat belt
• Seat belt ind
• Sig gnd
• Signal
• Tire pressure ind
• Tire pressure warning check connector (under front of center console)
• Tpms
• Tpmstrigger-sw
• Unified meter control unit
• W/ i-key
• W/o i-key