ELECTRICAL 2001 - Chrysler - Convertible

Chrysler Sebring Limited 2001 - DESCRIPTION

CAUTION:

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

To prevent damage to the electrical system due to short circulating or overloading, each individual circuit is provided with a fuse. There are fuse blocks in the passenger compartment and in the engine compartment.

Chrysler Sebring Limited 2001 - FUSE JUNCTION BLOCK

CAUTION:

The Fuse Junction Block in the passenger compartment is located on the driver's side of instrument panel, behind endcap access hatch. See Fig. 1 & Fig. 2 .

Fig. 1: Chrysler Sebring Limited 2001 - Component Locations - Identifying Fuse Junction Block

Chrysler Sebring Limited 2001 - Component Locations - Identifying Fuse Junction Block Fuses

모든 배선 다이어그램에 액세스하십시오.

Fig. 2: Chrysler Sebring Limited 2001 - Component Locations - Identifying Fuse Junction Block Fuses

Chrysler Sebring Limited 2001 - POWER DISTRIBUTION CENTER

CAUTION:

NOTE:

Fusible links will melt to prevent a fire in the event that a large current flows through a system protected by a fusible link. In case of a melted fusible link, inspect wiring before replacement.

The Power Distribution Center is located in the engine compartment on the left front inner fender. See Fig. 3 through Fig. 9 .