POWER WINDOWS
Power Window Wiring Diagram for Infiniti Q45 t 1999
List of elements for Power Window Wiring Diagram for Infiniti Q45 t 1999:
- (left end of dash)
- 18b
- A/d ground
- Accessory
- Battery
- Body control module (bcm) (behind dash, right of steering column)
- Circuit breaker 1 (behind left kick panel)
- Circuit breaker 2 (behind left kick panel)
- Data line a1
- Data line a2
- Driver's door control unit (inside left front door)
- Driver's side front power window regulator
- Fuse 14 7.5a
- Fuse 23 7.5a
- Fuse 32 7.5a
- Fuse 34 7.5a
- Fuse block (behind left side of dash)
- G201 (right end of dash)
- G202
- G202 (left end of dash)
- G309 (left front door sill)
- G316 (right front door sill)
- Ground
- Hot at all times
- Hot in accy or on
- Hot in on or start
- Hot in start
- Ignition
- Joint connector 12 (behind top center of dash, taped to harness)
- Joint connector 3 (behind left side of dash, near fuse box)
- Joint connector 4 (behind upper left side of dash)
- Left rear door control unit (inside left rear door)
- Left rear power window regulator
- P/w down
- P/w up
- Passenger's door control unit (inside right front door)
- Passenger's front power window regulator
- Pnk
- Right rear door control unit (inside right rear door)
- Right rear power window regulator
- Start