WARNING SYSTEMS
Warning Systems Wiring Diagram for Cadillac XLR V 2009
List of elements for Warning Systems Wiring Diagram for Cadillac XLR V 2009:
- (right rear of engine compt) underhood fuse block
- Ajar
- Audible alarm
- Auto
- B15
- B16
- Batt
- Bcm class 2 serial data
- Body control module (bcm) (behind right side of dash)
- Brake fluid level switch (in brake fluid reservoir)
- Brake fuid lvl sns sig
- Brake ind
- Class 2 (sdm)
- Closed
- Computer data lines system
- Dr locks fuse 15 15a
- Driver door latch
- Driver information center (dic) display
- Driver seat belt buckle
- Driver seat belt switch
- Engine control module (ecm) (lower right rear of engine compt)
- F10
- G101
- G201
- G301
- Gmlan (sdm)
- Head
- High spd gmlan serial data bus +
- High spd gmlan serial data bus -
- Hot at all times
- Inflatable restraint sensing & diagnostic module (sdm) (under center console)
- Instrument panel cluster (ipc)
- Interior lights fuse 17 10a
- Internal antenna
- Ipc
- Ipc class 2 serial data
- J275
- J375
- J391 (in driver's seat harness, approximately 4.0 cm from inflatable restraint seat position switch breakout)
- Left
- Left seat belt sw
- Left turn ind
- Left turn sig sw
- Lf dr open sw sig
- Logic
- Low ref
- Nca
- Off
- Open
- Park
- Park brake pedal assembly
- Park brake sw sig
- Pk lmp sw on sig
- Pnk
- Radio
- Radio class 2 serial data
- Remote control door lock receiver (rcdlr) (behind right side of dash)
- Rfa class 2 serial data
- Right
- Right turn ind
- Right turn sig sw
- Sdm class 2 serial data
- Seat belt ind
- Splice pack jx101 (in forward lamp harness, in engine compt, on upper left frame rail, grounded to g101)
- Splice pack jx201 (in instrument panel harness, at base of left "a" pillar behind trim panel, grounded to g201)
- Splice pack jx301 (in instrument panel harness, on left "b" pillar behind trim panel, grounded to g301)
- Tan
- Traction off ind
- Turn signal/ multi-function switch