CRUISE CONTROL
Cruise Control Wiring Diagram for Nissan Frontier Desert Runner SE 2003
List of elements for Cruise Control Wiring Diagram for Nissan Frontier Desert Runner SE 2003:
- (2 door) (4 door)
- (4wd)
- (a/t 2wd)
- (a/t)
- (a/t) solenoid valve unit
- (at left "a" pillar) m14
- (m/t 2wd)
- (m/t)
- (not used)
- 11p
- 2.4l
- 3.3l
- A/t
- Acsd clutch switch (on bracket, above clutch pedal)
- Ascd brake switch (on bracket, above brake pedal)
- Ascd control unit (behind dash, left of steering column)
- Ascd cruise sw
- Ascd motor actuator (2.4l: at left side of engine compt, near rear of air intake box) (3.3l: at right rear of engine compt)
- Ascd relay (a/t) (behind dash, left of steering column)
- Ascd steering switch
- Ascd switch
- Brake nc sw
- Brake no sw
- Cancel switch
- Clutch
- Clutch gnd
- Clutch pwr
- Coast/ set switch
- Combination meter
- Command sw (a/d)
- Command sw (gnd)
- Cruise
- Cruise lamp
- Cruise sig
- E49
- Fuse 11 10a
- Fuse 12 7.5a
- Fuse 22 15a 20a
- Fuse 5 10a
- Fuse block (at left side of dash, behind cover)
- Ground
- Hot at all times
- Hot in on or start
- Ign
- M/t
- M14 (at left "a" pillar)
- M26
- M27
- M38
- M39
- Motor
- Motor 1
- Motor 2
- Motor 3
- O/d cancel sol
- Off
- On/off switch
- Park/neutral position (pnp) switch (a/t) (on right side of transmission)
- Resume/ accel switch
- Set
- Set lamp
- Spiral cable
- Stoplight switch (on bracket, above brake pedal)
- Transmission control module (tcm) (a/t) (behind dash, left of steering column)
- Unified meter control unit (w/odo/ trip meter)
- Vehicle speed
- Vehicle speed sensor (2.4l: on right rear of transmission) (2.4l: on bottom left rear of transmission) (3.3l: on right side of transmission) (3.3l: on top of transmission) (3.3l: on right rear of transmission)