INSTRUMENT CLUSTER
Instrument Cluster Wiring Diagram for Nissan Altima GLE 2000
List of elements for Instrument Cluster Wiring Diagram for Nissan Altima GLE 2000:
- (a/t)
- (at base of parking brake lever) parking brake switch
- (behind right side of dash) diode
- (canada)
- (front of left front fender) g100
- (front of right front fender) g101
- (left "c" pillar) g904
- (left kick panel)
- (or 25)
- (or 26)
- (right side of dash)
- (w/ power door locks)
- (w/ theft warning)
- (w/o power door locks)
- (w/o theft warning)
- 1.4w
- 1.4w abs ind
- 16k
- Abs control unit (behind left kick panel)
- Air bag
- Airbag diagnostic sensor unit (below rear of center console)
- Ascd control unit (behind left side of dash)
- Brake
- Brake fluid level switch (in brake fluid reservoir)
- Canada
- Charge
- Combination meter
- Cruise
- Door
- Ecm (eccs control module) (behind instrument panel lower cover)
- Exterior lights system
- Fuel gauge
- Fuel lamp
- Fuel level sensor unit (in fuel tank)
- Fuse 12 10a
- Fuse 24 10a
- Fuse block (under left side of dash)
- G200
- G200 (left kick panel)
- G201
- G308 (left "b" pillar)
- Generator
- Headlights system
- Hi beam ind
- Hot at all times
- Hot in on or start
- Illumination (5 bulbs)
- Interior lights system
- Left front door switch
- Left rear door switch
- Left turn ind
- M72
- M73
- Mil
- O/d off
- Oil
- Oil pressure switch (on right side of engine, near oil filter)
- Red
- Right front door switch
- Right rear door switch
- Right turn ind
- Seat belt buckle switch (in driver seat belt buckle)
- Seatbelt
- Set
- Smart entrance control unit (behind dash, right of steering column)
- Speed- ometer
- Tach- ometer
- Temp. gauge
- Thermal transmitter (upper right rear of engine)
- Unified meter control unit (w/ odo/trip meter)
- Usa
- Vehicle speed sensor (on transaxle)
- Washer
- Washer fluid level switch (in washer fluid reservoir)