WARNING SYSTEMS
Warning Systems Wiring Diagram for Nissan Armada LE 2008
List of elements for Warning Systems Wiring Diagram for Nissan Armada LE 2008:
- Air bag diagnosis sensor unit
- B7 (under left front seat)
- Bat
- Body control module (bcm) (behind center of dash)
- Buckle sw
- Buzzer
- Can-h
- Can-l
- Combi sw input 1
- Combi sw input 2
- Combi sw input 3
- Combi sw input 4
- Combi sw input 5
- Combi sw output 1
- Combi sw output 2
- Combi sw output 3
- Combi sw output 4
- Combi sw output 5
- Combination meter
- Combination switch
- Computer data lines system
- Door ind
- Door sw (dr)
- Fuse & fusible link box (at right rear of engine compt)
- Fuse & relay box (at right rear of engine compt)
- Fuse 10a
- Fuse block (j/b) (behind right end of dash)
- Fusible link 62 10a
- Fusible link f 50a
- Gnd
- Hot at all times
- Hot in on or start
- Ign sw
- Input 1
- Input 2
- Input 3
- Input 4
- Input 5
- Key sw
- Key switch & ignition knob switch
- Key switch & key lock solenoid (on steering column)
- Keyless pwr tuner
- Keyless tuner signal
- Left front door switch (at left "b" pillar)
- Left seat belt buckle pre-tensioner assembly (under driver's seat)
- M18
- M19
- M20
- M23
- M24
- M35
- M39
- M61 (behind center of dash)
- Output 1
- Output 2
- Output 3
- Output 4
- Output 5
- Pnk
- Power
- Remove keyless entry receiver
- Seat belt
- Seat belt ind
- Sig gnd
- Signal
- Tire pressure ind
- Tire pressure warning check connector (under front of center console)
- Tpms
- Tpmstrigger-sw
- Unified meter control unit
- W/ i-key
- W/o i-key